User manual NEC GT6000

[. . . ] GT6000/GT5000 LCD Projector User's Manual Important Information Precautions Please read this manual carefully before using your NEC GT6000/ GT5000 Projector and keep the manual handy for future reference. Record it here: If you are a user of the GT6000R, read the supplied document which describes the differences from the GT6000. CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. [. . . ] ("Terminal Panel Features" and "PC Control Connector" on pages 1-9 and 10-10) Connection at the Personal Computer Side Plug the serial cable into the (RS-232C) serial connector. Settings at the Personal Computer Side Perform the regular LAN connections settings according to the instruction manual of the LAN card (adapter). There are no special settings to be made in the connections with the projector. When Making Connections with Serial Cable or USB Cable(*) * USB cable connection is not supported by the LT260/LT240/LT220 and VT770. What Can Be Accomplished · Using Dynamic Image Utility 2. 0, a picture or slide can be sent to the projector and then projected to a screen. · Using the projector control function of Dynamic Image Utility 2. 0 allows operations to be performed from the personal computer which include switching the projector power on/off, signal selection, and adjustment of the picture quality. 6-5 6. Using the Projector in a Network b Software Installation NOTE · Windows XP operations will be described in examples given here. · When using Windows 2000, please perform software installation/uninstalling with "Administrators" authority. When using Windows XP, perform with "Computer Administrator" authority. · If you have NEC Projector User Supportware (Dynamic Image Utility 2. 0 and Image Express Utility 1. 0) already installed on your computer, before installing the new NEC Projector User Supportware, first uninstall the current one. Uninstalling Dynamic Image Utility 2. 0 and Viewer PPT Converter 2. 0 will all be uninstalled together. To uninstall Image Express Utility 1. 0, click "Image Express Utility 1. 0" from the list. A message "Are you sure you want to completely remove the selected application and all of its components?" will be displayed. When the uninstall procedure is completed, there will be a return to the "Add or Remove Programs" screen. There will be a return to the "Control Panel" screen. Installation Dynamic Image Utility 2. 0 and Viewer PPT Converter 2. 0 will all be installed together. If Windows has already been started, please exit all running application software. The installation may not be completed properly unless all software has been exited. 1. 3) Enter the CD-ROM drive name (e. g. , "Q: \") and then "SETUP. EXE" to [Open (O)]. Click "Please read this first" to open NEC Projector User Supportware Readme File. The installation will start automatically and the "Welcome" screen will appear. · Please carefully read the contents of the "End User License Agreement". · If you do not agree, please click [No] and exit the installer. · Viewer PPT Converter 2. 0 will be installed together at the time of installation of Dynamic Image Utility 2. 0. · If a message prompting you to restart the system will appear, restart the Windows. 8. Click "Installing the Image Express Utility 1. 0" · Repeat the steps 5 to 7 above stated. [. . . ] The lamp when used under normal operating conditions is warranted for 500 hours or 90 days, whichever comes first. WHO IS PROTECTED This warranty may be enforced only by the first purchaser, and is not transferable. WHAT IS COVERED AND WHAT IS NOT COVERED Except as specified below, this warranty covers all defects in material or workmanship in this product. NEC SOLUTIONS' LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE PRODUCT AT NEC SOLUTIONS' OPTION. The following are not covered by the limited warranty and NEC Solutions shall not be liable for: 1. or Canada by NEC Solutions or which is not purchased, installed, and operated in the U. S. A or Canada. [. . . ]