User manual NEC DTERM IP 16D TECHNICAL SPECIFICATIONS

[. . . ] [. . . ] Dterm IP Terminal Specifications Dterm IP 4D Network Parameters Interface 10/100 base T (IEEE 802. 3), RJ45 Dterm IP 8D 10/100 base T (IEEE 802. 3), RJ45 multiport Switch All Models: IPv4 All Models: NEC Peer-to-Peer (only) All Models: Max 300msec (10msec steps) All Models: 10ms ~ 40ms (10ms steps) All Models: DHCP or Static Assignable 801. p, ToS and Diff-Service Dterm IP 16D 10/100 base T (IEEE 802. 3), RJ45 multiport Switch Internet Layer IP Protocol Jitter Buffer Payload Interval IP Addressing QoS Equipment Specification Size (W x D x H) Tilt up Tilt down Weight Power Specification External Inline and Spare Pair Voltage: Current: Power Consumption: 48V 90mA 4. 32W 7. 57"x 8. 69"x 5. 57" 7. 57"x 8. 69"x 3. 80" (without stand unit) 1. 98Ibs 9. 09"x 8. 54"x 5. 28" 9. 09"x 8. 54"x 4. 17" 2. 51Ibs All Models: AC: 24V, Current 750mA 9. 09"x 9. 57"x 5. 28" 9. 09"x 9. 57"x 4. 17" 2. 51Ibs 48V 92mA 4. 42W 48V 92mA 4. 42W Protocol Support: IEEE802. 3af IEEE802. 3af and CDP (DIP Switch) IEEE802. 3af and CDP (DIP Switch) Protocol Support (with ILPA Integration): With ILPA can support CDP and NDP With ILPA can support NDP With ILPA can support NDP Operating Temperature IP Telephony Equipment Requirements UNIVERGE All Models: 0 ­ 40 deg C All Models Hardware: SV7000T Software: FP30-100 R16 or greater All Models Software: FP20-100 R15 or greater Model: 4 Software: 3200 Series R 6. 1 or greater Models: 8, 16, 32 Software: 3300 Series R8 or greater NEAX 2400 IPX NEAX 2000 IPS [. . . ] [. . . ]