User manual NEC 824 INSTALLATION MANUAL

[. . . ] Issue-1 December, 1998 HYBRID TELEPHONE SYSTEM GROUPHONE INSTRUCTION AND INSTALLATION MANUAL Model 308/824/1232/2464 RECORD OF REVISION Issue No. 1 Date December, 1998 Remarks 1st release for following ROM version: TX-Z 308: 3. 0 TX-Z 824: 5. 0 TX-Z 1232/2464: 3. 0 (CPU-B1) Nothing contained in this manual shall be deemed to be, and this manual does not constitute, a warranty of, or representation with respect to, any of the equipment covered. This manual is subject to change without notice and Nitsuko has no obligation to provide any updates or corrections to this manual. Further, Nitsuko also reserves the right, without prior notice, to make changes in equipment design or components as it deems appropriate. No representation is made that this manual is complete or accurate in all respects and Nitsuko shall not be liable for any errors or omissions. [. . . ] The user can, however, change the password for any other 10 digit code by system programming. The following programs can be accessed : - Program #42 : Walking Toll Restriction Security Code - Program #43 : Toll Restriction Class Assignment on Security Code - Program #46 : DISA Security Code - Program #47 : DISA Security Code Extension Assignment - Program #48 : DISA Toll Restriction Class - Program #99 : Program Buffer Cancellation STATION APPLICATION: KTS (only No. 10 extension) OPERATION: To Enter Programming Mode : 1. Press HOLD key. Note: Upon entering Programming Mode, if the Program address for which access is restricted is keyed, the display indication will go blank, pressing the # key will return the display to normal programming mode. ¾ 4-85 ¾ Other Features To exit Programming Mode : 1. RELATED SYSTEM DATA: None n Voice Mail Connection (TX-Z 824/1232/2464) DESCRIPTION: The TX-Z System is compatible with NVM-2 and NVM-22 Nitsuko Voice Mail Systems. This feature provides telephone users with comprehensive Voice Messaging and Auto Attendant capabilities. Voice Mail Interface Units are also required for Voice Mail Connection. The 408M/208E/008E/408U/008U units connected Voice Mail must be mounted new version of sub-CPU (MB89626RPF-G-615 or 616). STATION APPLICATION: Not Applicable OPERATION: Refer to NVM User's Guide. - Extension number "AAA" telephone is setting [Call Forward when busy] from "BBB". - XX: Extension number (3 digit mode is indicated "XXX") - If extension name is entered, "XX" is indicated substitute extension name (Max 8 digit) for extension number. - XX: Extension number (3 digit mode is indicated "XXX") - If extension name is entered, "XX" is indicated substitute extension name (Max 8 digit) for extension number. - XX: Extension number (3 digit mode is indicated "XXX") - If extension name is entered, "XX" is indicated substitute extension name (Max 8 digit) for extension number. - XX: Extension number (3 digit mode is indicated "XXX") - If extension name is entered, "XX" is indicated substitute extension name (Max 8 digit) for extension number. - When extension number/hunting group number enter, this data indicated most right side digit of under LCD. - If line name is entered, "XX" is indicated substitute line name (Max 8 digit) for extension number. - XX: Line number - Abbreviated Dial number is indicated most right side digit the under LCD. - Entered Dial number is indicated most right side digit the under LCD. - XX: Extension number (Hard number) (10 - System Max. ) - Operation for confirmation: 1. (Continued: Dial "*") (When storage quantity of Abbreviated Dialing is assigned "100", and #75-B is enabled, F key No. PASSWORD> Pause (Outgoing, Storing, Confirmation) Each Extension Hard No. and Paging Group No. #LINE 01 12345P678 ##SUN#25#12:00PM TEL-XX##PAG. GP-Y - XX: Extension number (Hard number) (10 - System Max. ) - Y: Paging Group number (0 - 4) (0 = Not assigned) - Operation for confirmation: 1. Press HOLD key. ¾ 4-101 ¾ List of Dial Number Plan 1. [. . . ] If nobody answered to held line within the time which was set in Program #65, the system sends the VAU Message (No. 05 Cut-Off Message) to the held line (outside caller), and the line will be cut off forcibly. On the ordinary incoming calls, when a user is making conversation with outside party, the extension user can send the Unattendant Message to this line and this line is put on hold before the Program #65 timer is over. I-HOLD mode is set at the extension in this case. ¾ 7-3-3-29 ¾ Other Features STATION APPLICATION: System OPERATION: To send an Unattendant Message (VAU Message No. [. . . ]