User manual NEC 42VP4DA

[. . . ] PlasmaSync Plasma Monitor User's Manual NEC Solutions (America), Inc. Introduction Introduction to the PlasmaSync 42VP4, 42VP4D Plasma Monitor NEC's PlasmaSyncTM is a seamless blend of cutting-edge visual technology and sophisticated design. At 42 inches, with a 16:9 aspect ratio, the PlasmaSyncTM certainly makes a big impression. However, at a mere 89 mm thin, the monitor's sleek techno-art lines blend in well with your environment. PlasmaSync's crisp, vivid image quality will transform data from any graphic medium from PCs to DVD players- into art. [. . . ] Use the v and w buttons to select "IMAGE ADJUST", then press the MENU/ENTER button. Default settings (when RGB/PC is selected) IMAGE ADJUST ASPECT MODE : NORMAL V-POSITION H-POSITION V-HEIGHT H-WIDTH AUTO PICTURE : OFF FINE PICTURE PICTURE ADJ. ADJ. * The settings on the IMAGE ADJUST menu are not preset at the factory. The mode switches as follows when the buttons are pressed: NORMAL FULL and : : : VIDEO2 HD/DVD1 RGB1 SEL. ADJ. EXIT RETURN * The mode can also be switched by pressing the "WIDE" button on the remote control. Use the v and w buttons to select "V-POSITION". IMAGE ADJUST ASPECT MODE : NORMAL V-POSITION H-POSITION V-HEIGHT H-WIDTH AUTO PICTURE : OFF FINE PICTURE PICTURE ADJ. To delete the main menu, press the EXIT button once more. Information AUDIO INPUT A single audio input cannot be selected as the audio channel for more than one input terminal. Restoring the factory default settings Select "ALL RESET" under the OPTION1 menu. Note that this also restores other settings to the factory defaults. 3. Adjust using the and buttons. V-POSITION * If neither the or button is pressed within 5 seconds, the current setting is set and the previous screen reappears. To delete the main menu, press the EXIT button once more. 22 Information When "AUTO PICTURE" is "OFF" IMAGE ADJUST ASPECT MODE : FULL V-POSITION H-POSITION V-HEIGHT H-WIDTH AUTO PICTURE : OFF FINE PICTURE PICTURE ADJ. ADJ. Option1 Settings Menu Setting the on-screen menu This sets the position of the menu, the display format (horizontal or vertical) etc. Example: Turning the DISPLAY OSM off Press the MENU/ENTER button on the remote control to display the MAIN MENU on the screen, then. . . 1. Use the v and w buttons to select "OPTION1", then press the MENU/ENTER button. Use the v and w buttons to select "OSM", then press the MENU/ENTER button. The mode switches as follows each time the button is pressed: ON OFF OSM DISPLAY OSM OSM ADJ. OSM ANGLE OSM ORBITER : : : : OFF 1 H OFF When Auto Picture is off, the Fine Picture and the Picture ADJ. The Picture ADJ. , Fine Picture and Position adjustments are made automatically. The Picture ADJ. , Fine Picture and Position adjustments are made manually. * If FINE PICTURE won't be adjusted, set Auto Picture to OFF and adjust manually. and Fine Picture features are available only when the "Auto Picture" is off. But, these features are not available for moving pictures on VIDEO, HD/DVD or RGB. Restoring the factory default settings Select "ALL RESET" under the OPTION1 menu. [. . . ] (hereinafter NEC Solutions) warrants this product to be free from defects in material and workmanship under the following terms and, subject to the conditions set forth below, agrees to repair or replace (at NEC Solutions' sole option) any part of the enclosed unit which proves defective. Replacement parts or products may be new or refurbished and will meet specifications of the original parts or products. Parts and labor are warranted for (1) one year from the date of the first customer purchase. WHAT IS COVERED AND WHAT IS NOT COVERED Except as specified below, this warranty covers all defects in material or workmanship in this product. [. . . ]