User manual NEC 42 VP5 VM5

[. . . ] Operation Manual For the specifications of your plasma monitor, refer to "Model Information". ENGLISH DEUTSCH FRANÇAIS ESPAÑOL ITALIANO Important Information Precautions Please read this manual carefully before using your plasma monitor and keep the manual handy for future reference. The manufacturer is not liable for any bodily harm or damage caused if unqualified persons attempt service or open the back cover. Continued operation at line voltages greater than 100-240 Volts AC will shorten the life of the unit, and might even cause a fire hazard. In case of accident, unplug the power cord and have it serviced by an authorized Service Center. [. . . ] Information Audio settings menu BASS: Controls the level of low frequency sound. BALANCE: Controls the balance of the left and right channels. V-POSITION +64 Information When "AUTO PICTURE" is "OFF" IMAGE ADJUST ASPECT MODE : FULL V-POSITION H-POSITION V-HEIGHT H-WIDTH AUTO PICTURE : OFF FINE PICTURE PICTURE ADJ. ADJ. Setting the allocation of the audio connectors Setting the AUDIO 1, 2, and 3 connectors to the desired input. Example: Setting "AUDIO INPUT1" to "VIDEO 2" On "AUDIO INPUT1" of "AUDIO" menu, select "VIDEO2". The available sources depend on the settings of input. AUDIO BASS TREBLE BALANCE AUDIO INPUT1 AUDIO INPUT2 AUDIO INPUT3 : : : VIDEO2 HD/DVD1 RGB1 SEL. ADJ. EXIT RETURN Information AUDIO INPUT A single audio input cannot be selected as the audio channel for more than one input terminal. When Auto Picture is off, the Fine Picture and the Picture ADJ. Adjusting the Auto Picture ON: The Picture ADJ. , Fine Picture and Position adjustments are made automatically. OFF: The Picture ADJ. , Fine Picture and Position adjustments are made manually. * If FINE PICTURE can't be adjusted, set Auto Picture to OFF and adjust manually. Adjusting the position of the image V-POSITION: Adjusts the vertical position of the image. (Except for STADIUM mode) H-WIDTH: Adjusts the horizontal size of the image. and Fine Picture features are available only when the "Auto Picture" is off. But, these features are not available for moving pictures on VIDEO, HD/DVD or RGB. E-18 Option1 Settings Menu Setting the on-screen menu This sets the position of the menu, the display format (horizontal or vertical) etc. Example: Turning the DISPLAY OSM off On "OPTION1" menu, select "OSM", then press the MENU/ ENTER button. On "DISPLAY OSM" of "OSM" menu, select "OFF". OSM DISPLAY OSM OSM ADJ. OSM ANGLE OSM ORBITER OSM CONTRAST : : : : : OFF 1 H OFF LOW Setting the BNC connectors Select whether to set the input of the 5 BNC connectors to RGB, component or SCART1, 2. Example: Set the BNC INPUT mode to "COMP. " On "BNC INPUT" of "OPTION1" menu, select "COMP. ". 1/3 OPTION1 OSM BNC INPUT : COMP. D-SUB INPUT : RGB RGB SELECT : AUTO HD SELECT : 1080B INPUT SKIP : OFF ALL RESET : OFF NEXT PAGE EXIT RETURN SEL. ADJ. SEL. ADJ. EXIT RETURN Information DISPLAY OSM settings ON: The on-screen menu appears. If you press the DISPLAY button on the remote control for more than 3 seconds the main menu will appear and can be set (although it is not ON). OSM ADJUST settings Adjusts the position of the menu when it appears on the screen. The position can be set between 1 to 6. Information BNC INPUT Settings RGB: Use the 5BNC terminals for RGB input. SCART2: Use the 3BNC terminals for RGB and the VIDEO1 terminal for composite sync. [. . . ] · Is a connected component set directly in front or at · Leave some space between the display and the the side of the display?· Is the monitor's power cord plugged into a power outlet?· Set an ID number with the ID SELECT button, or set the ID number to ALL. · Set an ID number with the ID SELECT button, or set the ID number to ALL. [. . . ]