User manual NEC 2100

[. . . ] N DigitalTalk MAXTM 2100 Owner's Manual -0- Table of Contents Chapter 1: Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Phone Activation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Phone Safety & Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 NEC Authentic AccessoriesTM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Connecting & Disconnecting the Battery. . . . . . . . . . . . . . . . . . . . . . . . . 1 Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 NiCd and NiMH Battery Charging Times . . . . . . . . . . . . . . . . . . . . . . . . 2 Voice Mail Messaging & Text Messaging . . . . . . . . . . . . . . . . . . . . . . . 2 Phone Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Phone Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Display Icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Menu Tree Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Menu Navigation Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Chapter 2: Basic Operations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Turning On Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press As prompted, enter the current 4-digit password and then enter the desired new 4-digit password. M. Call M42 Menu Shortcut Any Key Answer M421 With the any key answer setting activated, any key except N and P can be pressed to answer the phone. Press 1 to set any key answer to Off or press 2 to set any key answer to On. When set to On, you can answer a call with any key except N or P. Menu Shortcut Analog/Digital Call Type M422 Your digital phone operates on either a digital or an analog system control channel. As shown in "Phone Layout" on page 3, the current system control channel is indicated on the standby mode display by the !Even when your phone is operating on a digital control channel, the voice channel your phone uses -18- each time a call is either sent or received also can be either digital or analog. (See the following paragraph for information on the use of digital and analog voice channels. ) To select the voice channel type, press then press M422; 1 for digital call type or 2 for analog call !The call type/voice channel currently in use for the call in progress is indicated on the phone display by the for digital voice channel or the channel. Digital & Analog Voice Channels/Call Types With the voice channel/call type selection set to digital, your phone uses a digital voice channel, as available, to send and receive calls. If a digital voice channel is not available, your phone then automatically searches for an analog voice channel. With the voice channel/call type selection set to analog, your phone only uses an analog voice channel to send and receive calls. The restricted use of analog voice channels is necessary if you are using a PCMCIA data interface card with your phone to send facsimiles or communicate via modem. Note that operating on an analog voice channel consumes the phone battery power at a faster rate than operating on a digital voice channel. For optimum results and performance, you can set your phone to the digital call type selection and use the analog call type selection, as needed, for use with a data interface card. ? Menu Shortcut DTMF Length M423 Your phone can transmit tones, referred to as DTMF tones, when the keys of the phone are pressed. These tones allow your phone to successfully communicate with automated telephone services such as banking transactions and credit card inquiries. (See the following paragraph for additional information on short tone use and long tone use). 1 to select the short tone setting or press 2 to select the long tone setting. Press N to exit the DTMF select the length of the tone, press Press length menu. Short Tone Use & Long Tone Use You can access most automated systems by setting your phone to the short tone selection. If you experience any problems communicating with an automated system, set the DTMF length to long and verify that the capability to transmit tones (see the following menu selection, Transmit DTMF Tone) is turned on. Note that you must press and hold a key, up to a maximum of three seconds, to transmit a long tone. Because transmitting long tones can result in slower dialing, you can set your phone to the short tone selection and only use the long tone selection, as needed. ? -19- Menu Shortcut Transmit DTMF Tone M424 For your phone to successfully transmit tones, as described "Transmit DTMF Tone" on page 20, for accessing automated telephone systems, the capability to transmit tones must be turned on. (See the following paragraph for additional information on setting tones on or off. ) To select the DTMF tone tone transmission or press M424. Press N to exit the transmit DTMF tone menu. setting, press ? DTMF On or Off Since the ability to communicate with automated systems is frequently needed, you can usually set and maintain the DTMF tone transmit selection to on. [. . . ] (b) Any other warranties, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, shall be limited to the duration of this warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. (c) NECAM's total liability for damages for any cause related to or arising out of the use or inability to use the product, whether in contract, negligence, strict tort, or based on any other legal theory, shall not exceed the original price paid for the product. (d) In no case shall NECAM be liable for any indirect, special, incidental, or consequential damages based upon breach of warranty, breach of contract, negligence, strict tort, or any other legal theory. [. . . ]