User manual NAPOLEON GRILLS BUILT-IN GRILLS

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual NAPOLEON GRILLS BUILT-IN GRILLS. We hope that this NAPOLEON GRILLS BUILT-IN GRILLS user guide will be useful to you.


NAPOLEON GRILLS BUILT-IN GRILLS : Download the complete user guide (985 Ko)

Manual abstract: user guide NAPOLEON GRILLS BUILT-IN GRILLS

Detailed instructions for use are in the User's Guide.

[. . . ] The tank can not be stored below the gas grill. BUILT IN NATURAL GAS HOOK-UP: The piping up to the gas grill is the responsibility of the installer and piping should be located as shown in the built-in instructions. It must be connected with either rigid pipe, copper tube or an approved flexible metal connector. The installation must comply with CAN B149. 1 Natural Gas and Propane Installation Code in Canada, or to the National Fuel Gas Code, ANSI Z223. 1 in the United States. The minimum recommended piping size is NPS 1/2" for rigid pipe, and 5/8" OD for copper tubing (based on a 20 ft run). [. . . ] Attach side mounting brackets and side trim pieces to each side of the grill using 1/4-20 x 1/2" screws (n570-0026). Mount the lower front trim to the bottom front edge of the opening (fasteners not included). To keep it in place, a dab of silicone may be applied to each wing of the rear trim. Lower the unit in place, and connect the gas supply line to the fitting at the end of the manifold. This can be accomplished by mounting the left and right trim pieces to the sides of the opening to the sides of the cabinet. 6. The entire installation must be leak tested before operating the unit. 2. BIPT750 BUILT-IN INSTRUCTIONS N080-0142 N570-0026 N380-0009 N715-0076 N051-0001 N715-0060 N710-0044 N715-0059 N715-0077 This grill is designed for masonry, non-combustible enclosures only, and must be installed and serviced by a qualified installer to local codes. Attach side mounting brackets and side trim pieces to each side of the grill using 1/4-20 x 1/2" screws (n570-0026). Mount the lower front trim to the bottom front edge of the opening (fasteners not included). To keep it in place, a dab of silicone may be applied to each wing of the rear trim. Lower the unit in place, and connect the gas supply line to the fitting at the end of the manifold. This can be accomplished by mounting the left and right trim pieces to the sides of the opening to the sides of the cabinet. 6. The entire installation must be leak tested before operating the unit. 3. BIU405 BUILT-IN INSTRUCTIONS N080-0152 N715-0063 N570-0026 N570-0026 N570-0026 N080-0152 23 e c-c N080-0155 N080-0155 This grill is designed for masonry, non-combustible enclosures only, and must be installed and serviced by a qualified installer to local codes. Access must be provided in the enclosure for drip tray removal and cleaning. Attach the side mounting brackets and the rear trim to the unit using #14 x 1/2" screws (n570-0026). The wings on the rear trim should be under the side mounting brackets. Attach the supplied brackets flush with the front of the opening as per the dimensions in the above drawing (fasteners not included). Lower the unit in place ensuring the brackets installed in the previous step engage between the control panel and the base bracket. The entire installation must be leak tested before operating the unit. 4. BUILT-IN SIDE BURNER INSTRUCTIONS N280-0003P (BLACK) N280-0004 (STN STL) 1. The frame should be attached to the opening to prevent any future movement (fasteners not included). [. . . ] Remember on the PT600 double doors, there will be a pivot rod on both ends. Once all pivot holes are marked, remove the frame and using a 3/8" drill bit, drill out the clearance holes for the pivot rod. After the holes are complete, you may once again center the frame in the opening. Starting with the hinged side, shim between the frame and side wall of the opening. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE NAPOLEON GRILLS BUILT-IN GRILLS




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual NAPOLEON GRILLS BUILT-IN GRILLS will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.