User manual NADY CM 88

[. . . ] A foam padded plastic carrying case is provided for safe, convenient transport and storage. STANDARD ITEMS SUPPLIED · CM 88 microphone · Microphone clip · Foam windscreen · User Guide · Warranty card OPTIONAL ACCESSORIES · 48V phantom power supply (SMPS-1) FEATURES Back electret condenser microphone designed for cymbals of all types (including rides, crashes and hi-hats), reeds, acoustic guitars, piano and vocals (with the accessory windscreen) and overhead applications (both live and recording) · Extremely uniform and tight cardioid polar pattern for ease in mixing · Extended frequency response for smooth, crisp, ultra-transparent reproduction · Aluminum housing and gold-plated XLR contacts · 9-52V phantom powered CONNECTING THE CM 88 The CM 88 can be used in live sound reinforcement and broadcasting and in studio or live recording. It must be powered by 48V phantom power (such as supplied by the optional Nady SMPS-1 phantom power supply or a mixing console with phantom powering), and amplified by a microphone pre-amp (such as built into a mixer, or a standalone unit). (Note: Make sure to set the pre-amp to the proper gain leveltoo much gain may distort subsequent amplifiers and too little may result in a noisy signal) The CM 88 can be connected to your mixer or phantom power supply using a standard balanced 3-pin XLR microphone cable. [. . . ] This means that feedback will be greatly minimized with the CM 88 in all live performance miking applications. Some useful ways in which to totally eliminate annoying feedback include: experimenting with mic positions with respect to the speakers, decreasing speaker volume (whenever possible), and adjusting the equalization of the mic audio with the mixer. PRECAUTIONS AND CARE OF YOUR CM 88 · The capsule is the heart of the condenser microphone. Always use a foam windscreen if you talk or sing close to the microphone grill screen. · The microphone should never be dropped or subjected to extreme shock. · Keep the microphone away from extremely high temperatures (above 140°F or 60°C) and humidity. Avoid leaving the microphone in direct sunlight for long periods of time. · After use in a high-moisture application such as a stage performance, wipe off the microphone with a dry cloth and permit it to air dry. Do not store the unit in a closed space (e. g. , a plastic bag) until all moisture has evaporated. This windscreen fits over the grill portion of the microphone and is designed primarily to decrease bass rumble (from wind noise pickup) during outdoor live or recording use. The windscreen should be used whenever someone is close miked to both protect the microphone and to also eliminate "popping" sounds from percussive breath sounds. (Note: Be aware that the foam windscreen will slightly attenuate the high frequency response of the microphone. ) FREQUENCY RESPONSE SERVICE (U. S. ) Should your Nady microphone require service, please contact the Nady Service Department via telephone at (510) 652- 2411 or e-mail at service@nadywireless. com. (INTERNATIONAL) For service, please contact the Nady distributor in your country through the dealer from whom you purchased this product. Date of purchase _________________________________________________________________________________________________________ Dealer's Name ___________________________________________________________________________________________________________ Street __________________________________________________________________________________________________________________ City _________________________________________ State ________________________ Zip __________________________________________ Note: Do not attempt to service this unit yourself as it will void your warranty. CM 88 SPECIFICATIONS Element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Black Electret Condenser Polar pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 3-pin XLR (gold plated) Phasing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Positive voltage on pin 2 relative to pin 3 Mic cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-pin XLR standard cable (not supplied) Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]