User manual NADY CM 55

[. . . ] C SERIES DRUM/INSTRUMENT/ SPECIALTY-USE MICROPHONES CM 55 Clip-on Miniature Condenser Microphone Congratulations on purchasing the Nady CM 55 Microphone! [. . . ] Adjust the gooseneck to position the mic as desired close to the sound source. Be aware of the proximity effect (an increase in bass response) when the mic is placed close to the instrument. Experimenting with the position of the mic with respect to the audio source will ensure the optimum results you are seeking in any given application. If the microphone is placed too near a speaker during live stage use, an unpleasant howling effect (acoustic feedback) may occur. Although all microphones are prone to feedback to some extent, those with a unidirectional polar pattern (such as the CM 55) are specially designed to accept only signals from the audio source directly in front of the mic cartridge. Thus, the hypercardioid pattern of the CM 55 ensures that it will deliver only the desired audio in front of the mic, rejecting the unwanted audio from the rear, even in noisy ambient conditions with high sound pressure levels from the P. A. This means that feedback will be greatly minimized with the CM 55 in all live performance miking applications. The hypercardioid pattern of the CM 55 also ensures optimum isolation of the instrument miked from the other instruments in the mix. [. . . ] Do not store the unit in a closed space (e. g. , a plastic bag) until all moisture has evaporated. FEATURES · · · · · · · Miniature clip-on back electret condenser microphone designed for close-up miking of drums, and acoustic string and wind instruments Mounts to drum rims, the edge of acoustic guitar sound holes or the bell of wind instruments for accurate sound reproduction and isolation from other instruments Tight hypercardioid polar response is highly effective in suppressing feedback and unwanted sounds Sturdy rubber-grip spring clamp holds mic securely and prevents marring the finish Adjustable gooseneck and swivel joint allows optimum microphone positioning and holds any convenient angle placement for ultimate ease of set-up Extended 50Hz - 20KHz response for exceptional performance 9-52V phantom powered FREQUENCY RESPONSE POLAR DIAGRAM SPECIFICATIONS Transducer Type: Directional Pattern: Frequency Response: Sensitivity (@ 1KHz, , 0dB=1V/u Bar)): Impedance: Maximum SPL (@3% THD): Power Requirements: Connector: Weight: Material: Back electret condenser element Hypercardioid 50~20, 000 Hz -70dB +/-3dB 250 Ohms, balanced >130dB 9-52V Phantom 3-Pin XLR 6. 1 oz (170 g. ) All metal housing SERVICE (U. S. ) Should your Nady microphone require service, please contact the Nady Service Department via phone at (510) 652-2411 or e-mail at service@nady. com (INTERNATIONAL) For service, please contact the Nady distributor in your country through the dealer from whom you purchased this product. [. . . ]