User manual NADY ACCESS PSS-150

[. . . ] 7 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2 Dealer's Name ______________________________________ City _______________________________________________ State _____________________ Zip _____________________ Model # ____________________________________________ Serial # ___________________ WARNING An equilateral triangle enclosing a lightening flash/arrowhead symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure which may be of sufficient magnitude to constitute a risk of electric shock. ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR An equilateral triangle enclosing an exclamation point is intended to alert the user to the presence of important operating and service instructions in the literature enclosed with this unit. IMPORTANT SAFETY INSTRUCTIONS When using this electronic device, basic precautions should always be taken, including the following: 1. Do not use this product near water (e. g. , near a bathtub, washbowl, kitchen sink, in a wet basement, or near a swimming pool, etc. ). This product should be used only with a cart or stand that will keep it level and stable and prevent wobbling. [. . . ] The supplied SP-1 StarpowerTM microphone is an allpurpose professional stage and recording microphone with rugged metal construction and excellent clear, transparent sound across the spectrum. Make sure that the unit is turned off before connecting to the AC power source to avoid possible loud transients which can damage your speakers or your ears. Before turning on, connect up the speakers and all inputs and outputs desired and turn down the Master Volume. 1. INSPECTION Your NADY AUDIO Portable Sound System 150 was carefully packed at the factory in packaging designed to protect the units in shipment. Before installing and using your unit, carefully examine the packaging and all contents for any signs of physical damage that may have occurred in transit. If your unit is damaged, do not return to Nady, but notify your dealer and the shipping company (if shipped to you) immediately to make a claim. Such claims must be made by the consignee in a timely manner. ] CONTENTS: · PSS-150 Mixer Section · PSS-150 Left Speaker · PSS-150 Right Speaker · (2x) Speaker Stands · (2x) 2 30' Speaker Cables · SP-1 StarpowerTM Microphone · XC-20 20' Microphone Cable · AC cord · Instruction Manual · Warranty Card 2. SETUP After transporting the PSS-150 to the desired location, lay the unit down on its flat side. Unclasp the side panel latches by pulling up on the yellow tab to release and unhook the latch. Carefully lift off the speakers and then remove the speaker stands and accessories from inside the unit. Mixer Section Position the PSS-150 mixer section on its flat surface with the control panel facing up. Care should be taken to ensure that there is enough space behind the Mixer Section for cooling. Also, do not place the Portable Sound System on high temperature devices such as power amplifiers, etc. , or the unit may overheat in operation. Although the Portable Sound System is shielded against radio frequency (RF) and electromagnetic interference (EMI), extremely high fields of RF and EMI should be avoided. 4 FRONT PANEL CONTROLS & CONNECTIONS (1) (2) (3) (14) (4) (13) (5) (6) (15) (7) (8) (9) (10) (11)(12) (1) CHANNEL 1-3 COMBO XLR / 1/4' INPUT The XLR mic inputs are an electronically balanced XLR type designed to accept mic level signals from any balanced or unbalanced low impedance (Low Z) microphone. The XLR jacks are configured for: Pin1 = ground, Pin2 = positive (+), Pin3 = negative (-). The XLR jacks have 15VDC phantom power applied to Pin2 and 3 for powering condenser microphones. The 1/4" mono line inputs are designed to accept unbalanced line level signals such as those from keyboards, drum machines, or samplers. (2) CHANNEL 4 XLR & 1/4" STEREO/MONO INPUTS The XLR input is balanced, designed to accept mic level signals, and has 15VDC phantom power. The Left and Right 1/4" line inputs are for connecting stereo line level audio signals or only the Left/Mono jack can be used for connecting mono signals. The XLR input is defeated when either of the 1/4" inputs are used. (3) CHANNEL 5 STEREO RCA INPUTS The stereo RCA line level inputs can be used for connecting CD players, Tape Decks, and other audio equipment with line level outputs. (4) MONO / STEREO MODE When the Mono/Stereo button is out (stereo mode) the Left RCA Aux In is sent to the Left Speaker and Right RCA Aux In is sent to the Right Speaker. [. . . ] 85 dB mic input typical REVERB/DELAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DSP digital reverb and digital delay SPEAKERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Woofer 10" (254mm) and piezoelectric horn tweeter AC POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 VAC(60 Hz0 or 230 VAC (50/60 Hz) DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]