User manual NAD T760

[. . . ] NAD GB · OWNER'S MANUAL ©1999 NAD ELECTRONICS LTD. T 760 T 760 IMPORTANT SAFETY INSTRUCTIONS CAUTION ATTENTION: RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Warning: To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. ATTENTION POUR ÉVITER LES CHOC ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. [. . . ] "VIDEO-3" or "VIDEO-4" is shown in the Display Panel when selected. The Video 3 & 4 inputs also have video and analogue audio outputs specifically for recording video devices. The Digital Input 3 is linked to the Video 3 input (marked Digital In on back panel; No. Digital Input 3 allows for connection of a digital source with a Coaxial digital output. Whenever Video 3 is selected, Digital Input 3 will also be selected; in the display the "DIGITAL 3" indicator will start to blink. If a digital audio signal is detected, the "DIGITAL 3" indicator will stop blinking and remain lit. If no digital audio signal is detected, "DIGITAL 3" indicator will cease blinking and extinguish. HEADPHONE SOCKET & VIDEO 5 INPUT HEADPHONE SOCKET A 1/4" stereo jack socket is supplied for headphone listening and will work with conventional headphones of any impedance. Use a suitable adapter to connect headphones with other types of connectors such as 3. 5mm stereo `personal stereo' jack plugs. Inserting a headphone will automatically turn off all speakers and signals from the Audio Pre-Out sockets. NOTES: In the OSD menu "Speaker settings" be sure to have selected and adjusted a preset with "MAIN SPEAKERS" set to "LARGE". Refer also to Chapter "On Screen Display (OSD)" for more information. VIDEO 5 INPUT For easy and temporary connection you can connect a camcorder (playback only) or video game console. If the game console or camcorder is mono, connect the audio lead to the R (Right) audio socket. 11. AUDIO & VIDEO INPUT SELECTORS & SURROUND MODE These buttons select the active video and audio input to the T 760 and the audio signal sent to the loudspeakers, Tape, Video 3 & 4 and TV monitor out- GB nected to the Video 5 front panel inputs as the active input. 5. 1 Selects the multi-channel output signal from the DVD player or external decoder source (such as MPEG, for instance) connected to the 5. 1 Ch. 5. 1 audio signal is available from headphones socket, the Tape, Video 3 and Video 4 outputs when the Ext. SURROUND MODE With the Surround Mode buttons the available surround sound modes can be selected. The selected Surround mode is permanently indicated in the display area and is also shown for 3 seconds in the large Star-Burst section of the display. The Surround Mode buttons scroll through the available surround sound modes: With any of the Digital Inputs 1, 2 & 3 (press Video 1, 2 or 3 respectively to select), the T 760 automatically recognizes if the selected source carries a Dolby Digital TM or DTS TM signal. When no Dolby Digital or DTS signal is available, the Surround Mode buttons scrolls through the other available surround sound modes: Stereo Pro Logic Ears Stereo, etc. NOTES: Dolby Digital or DTS are only available as a Surround Mode if the source is either Dolby Digital or DTS and a Digital Audio input is used. [. . . ] LFE (Low Frequency Effects, with a Dolby Digital source, the subwoofer channel) can be set from +10dB to -10dB. The Delay time for the Surround speakers also needs to be correctly set for your normal listening position. Refer to the section "Channel Delay" in this chapter for more information. Channel Balance: The output levels of each of the speakers connected to the T 760 may need to be adjusted so that there is an even balance of sound from all the speakers in the system. If, for instance, the relative volume level to the Left and Right speakers and the center speaker is set too low, most of dialogue may be difficult to follow. [. . . ]