User manual NAD T557

[. . . ] ® Owner's Manual Blu-ray DiscTM Player T 557 SVENSKA NEDERLANDS DEUTSCH ITALIANO ESPAÑOL FRANÇAIS ENGLISH IMPORTANT SAFETY INSTRUCTIONS ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA SAVE THESE INSTRUCTIONS FOR LATER USE. 1 Read instructions - All the safety and operating instructions should be read before the product is operated. 2 Retain instructions - The safety and operating instructions should be retained for future reference. 3 Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. [. . . ] Press the BR 2's [HOME] button and then select "Setup" for the Setup Menu OSD to appear. With the use of the BR 2's navigation buttons, you may select various menus. TV ASPECT RATIO Set TV ASPECT RATIO to select a picture size matching the aspect ratio of your TV/Monitor. Select "4:3 Letter Box" or "4:3 Pan Scan" when a standard 4:3 TV is connected. 4:3 Letter Box: Displays a wide picture with bands on the upper and lower portions of the screen. 4:3 Pan Scan: Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. Select "16:9 Original" or "16:9 Full" when a 16:9 wide TV is connected. 16:9 Original: The 4:3 picture is displayed with an original 4:3 aspect ration, with black bars appearing at the left and right sides. 16:9 Full: The 4:3 pictures is adjusted horizontally (in a linear proportion) to fill the entire screen. NOTE "4:3LetterBox"or"4:3PanScan"arenotselectablewhentheresolution issettohigherthan480i/480p(576i/576p). NAVIGATING THE SETUP MENU OSD AND MAKING CHANGES To navigate through the Setup Menu OSD options, please do the following using the BR 2 remote control: 1 Use [ ] keys to move up or down the menu selections. 3 Use [ ] keys to select through the options of a particular menu item. 5 Press [RTN] to exit the Setup menu. 11 SVENSKA NEDERLANDS DEUTSCH ITALIANO 2 Use [ ] keys to select among the following menu options Movie, Photo, Music or Setup. If there is no disc loaded, only "Setup" is accessible from these Home Menu options. 3 Press [ENTER] to select menu option. ESPAÑOL DISPLAY SETUP MENU FRANÇAIS ENGLISH OPERATION USING THE T 557 ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA RESOLUTION The T 557 provides several video output resolutions for the HDMI OUT and COMPONENT VIDEO OUT jacks. Resolution can be changed via the "Resolution" option in the DISPLAY SETUP menu or by toggling the [RES] button of the BR 2 remote control. The T 557 must be at STOP mode when BR 2's [RES] button is used to change the RESOLUTION setting. The following resolutions are selectable or available Auto: If the HDMI OUT jack is connected to a TV that provides display information, the T 557 automatically selects the resolution best suited to the connected TV. If COMPONENT VIDEO OUT is the selected video output media, the resolution changes to "Auto" ­ the default resolution for Component Video OUT. 1080p: Outputs 1080 lines of progressive video (applicable only for HDMI connection). HDMI OUT CONNECTION · For the 480i/576i resolution setting, the output resolution of HDMI OUT will change to 480p/576p. · If you select a resolution manually and then connect the HDMI jack to TV and your TV does not accept it, the resolution setting will automatically be set to "Auto". · The 1080p video output frame rate may be automatically set to either 24Hz or 50/60Hz depending upon the capability and preference of the connected TV and based on the native video frame rate of the BD-ROM disc's contents. [. . . ] · Check IR windows and ensure clear line-ofsight from remote to T 557. · Replace the remote control batteries. ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA · External USB is not connected. · T 557 front panel is in very bright sunlight or ambient light. · IR transmitter window on remote or IR receiver window is obstructed. [. . . ]