User manual NAD L55EN

[. . . ] The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated `dangerous voltage' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. To ensure proper use of this product, please read this owner's manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location. Use of controls, adjustments or the performance of procedures other than those specified may result in exposure to laser radiation. [. . . ] Set the playback picture size according to the aspect ratio of the connected TV at the SETUP menu (TV Aspect). If you do not have the necessary equipment to enjoy Dolby Digital sound, set the Digital Audio Output at the SETUP (Digital Audio Output) menu to "PCM". You can open the disc tray by pressing this button even if the DVD player is in standby mode. If the disc is out of the guide, it may damage the disc and cause the DVD player to malfunction. Do not place anything except 3" discs or 5" discs on the disc tray. If the disc is placed in upside down (and it is a single sided disc), "NO DISC" or "DISC ERROR" appears on the TV screen. If you insert an audio CD, the CD indicator lights up in the DVD display. After playing back all of the chapters in the title, the DVD player automatically stops and returns to the menu screen. For further info, also refer to the jacket or case of the disc you are playing. AFTER OPERATION When the unit is not in use, remove the disc and press POWER to turn off the power. Use the OPEN/CLOSE button on the remote control or DVD player to open and close the disc tray. Do not push up the disc tray or put any objects other than discs on the disc tray. Be especially careful with children's fingers around the closing disc tray as there is a risk of personal injury. When " " appears on the TV screen while a button is pressed, it means that this function is not available on the disc you are playing. Depending on the DVD disc, some operations may be different or restricted. When play is stopped, the unit records the point where STOP was pressed (RESUME function). The RESUME function works only with discs for which the elapsed playing time appears on the window display during playback. nOTES · Resume function will be cleared when the power is turned off and then on. If the player is left in the stop mode for more than 8 minutes, the power shuts off automatically. (Each time you press PAUSE/STEP, the picture advance one frame) To resume normal playback, press PLAY. A chapter (DVD) or a track (CD) is skipped each time the button is pressed. When the button is pressed once midway through a chapter/track, the player returns to the start of that chapter/track. [. . . ] PCM Select "PCM" if an active digital output is supplied to an amplifier or other equipment with linear PCM only (or MD recorder or DAT deck). nOTES · When you are not using the player's digital audio output, don't select any of the options. If an active digital audio output signal is supplied to an receiver or other equipment without a corresponding digital decoding capability, a very loud noise may be produced which could permanently damage the speakers. The DTS DVD disc sound is played back only when the DVD player is connected to a receiver with a DTS decoder. [. . . ]