User manual NAD 517

[. . . ] Note to CATV system installer: This reminder is provided to call the CATV installer's attention to Article 820-40 of the NEC , which provides guidelines for proper grounding and, in particular, specifies that the cable should be connected to the grounding system of the building, as close to the point of cable entry as practical. The lightning flash with arrowhead, within an equilateral triangle is intended to alert the user of the presence of uninsulated "dangerous voltage" within the product's enclosure; that may be of sufficient magnitude to constitute a risk of electric shock to persons. NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] To remove a disc from is storage case, press down on the centre of the case and lift the disc out, holding it carefully by the edges. Discs should be returned to their cases after use to protect them from dust and scratches. to prevent warping the disc , do not expose it to direct sunlight , high humidity or high temperatures for extended periods of time. To switch the POWER off, press the button again and release it (Button OUT) LOADING A DISC - The PLAY indicator goes OFF and the PAUSE indicator lights, (the sound is muted!When the last track on disc number 5 has finished playing (during normal play), the CD changer will stop. Press and release the ">>I button (7) to advance to the beginning of the next track. Press and release the "I<<" button (7) to return to the beginning of the currently playing track. Press and hold down the "I<<" button (7) to return to previous tracks. The selected track is played repeatedly until the STOP button is pressed. When the last track on disc number 5 has finished playing (during normal play), the CD changer will stop. Press and hold down either << or >> SCAN button (8) to quickly search the disc in the forward or reverse direction. The search speed will increase after the button is held down for approximately three seconds. - The CD changer will not search beyond the beginning or the end of the disc. NOTE: The unit will stop when the last track on disc number 5 has finished playing. Enter one of the following types of programs (see "PROGRAMMED DISC PLAY"). A)Various tracks on several discs b)One track (1 disc number and 1 track number) - The MEMORY indicator lights 3. All of the programmed tracks are played repeatedly in order until the STOP button is pressed. When the last track has finished playing during programmed play, the CD changer will stop. Press the REPEAT button to select the desired type of repeat disc play, which can be selected from the following options: 1. All programmed tracks (a) various tracks on several discs (b) all of the tracks on one disc (c) one track All of the loaded discs are played repeatedly until the STOP button (5) is pressed. Enter one of the following types of programs (see PROGRAMMED DISC PLAY") a) Various tracks on several discs b) All of the tracks on one disc -The MEMORY indicator lights. The programmed track selected will play repeatedly until the STOP button is pressed. [. . . ] When rotation of the carousel stops, release the pause mode and continue recording. - The Time display shows "P-01 - If the PROGRAM button is pressed before a disc number and a track number are selected, track 1 of the displayed disc number is entered as program selection number 1. To enter all of the tracks on a disc, select the disc number with a DISC NO. Up to 32 selections can be entered into the program memory for disc play in any order. [. . . ]