User manual MURATEC M-4700

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MURATEC M-4700. We hope that this MURATEC M-4700 user guide will be useful to you.


MURATEC M-4700 : Download the complete user guide (8781 Ko)

Manual abstract: user guide MURATEC M-4700

Detailed instructions for use are in the User's Guide.

[. . . ] If your machine receives a fax message or if any key is pressed your machine will automatically wake up. The time for the machine to enter the Energy saving mode can be selected from 1 to 240 minutes. For details, see "EasyStart, " page 1. 17. Super G3 is an extension of Group 3 fax technology standards, allowing the use of high-speed ITU-T V. 34 modems for 33. 6 Kbps transmission and high-speed protocols for rapid handshaking. JBIG -- Joint Bi-level Image experts Group, the new ITU-T standard image data compression method. [. . . ] Note: To tell the machine not to send a cover page, select "OFF" and press [Enter]. Press [Enter] to save the setting. 3 Now the cover page feature is working but your message line (shown in the example as "We appreciate your business. To enter that message, see "Entering the cover page message, " below. 3. 38 Advanced fax Separate each received document (Separator Page) Your machine has a simple sorting feature. It can separate each received document by inserting the separator page on the top of the received document. For example, if you use the colored paper for the separator page, it is easy to see the individual received document. (See page 4. 1. ) To set the Separator Page feature: 6 Select "Prt on Sep Page" then press [Enter]. Select "Separator Page" then press [Enter]. Note: "Prt on Sep Page" will be gray unless the Separator Page feature is turned on. 4 To turn the Separator Page feature on, select "ON" using the cursor key. Then press [Enter]. 8 9 5 Select the paper source for the separator page using the cursor key. Press RESET to finish. 3. 39 Fax Features Getting Started 1 2 3 Press MENU, J, [Enter]. Separator Page" then press [Enter]. 7 Determine if the separator page will be printed with blank or not. If you wish that the separator page will be blank, select "OFF". With this service, you physically still have one phone line, but, electronically, you have two phone numbers. Your phone recognizes these different numbers and rings differently for each one. For example, this makes it easy for you to have both a business number and a home number on one phone line, so you can answer one with "Jane Doe Consulting, " and the other with "Hello. " This works because you can tell the difference between the distinctive patterns of the two rings. Your fax machine is also smart enough to tell the difference between two different numbers that are ringing it. All you have to do is set up your machine for the OneLine + distinctive ring detection (DRD) feature. In order to use OneLine + DRD, your phone company must set up your distinctive ring service. For example, the standard telephone ring is 2 seconds "on" (ringing) and 4 seconds "off" (silent), after which it repeats itself. Your fax has eight possible distinctive ring patterns for use with OneLine + DRD. This chart lists the patterns: 1 2 Contact your phone company to make sure it has set up DRD service for you. If possible, also find out which distinctive ring pattern the phone company has assigned you. Select "ON" or "OFF" using the cursor key and then press [Enter]. 5 Pattern One complete ring pattern (seconds) 0. 8 on, 0. 4 off, 0. 8 on, 4. 0 off 0. 4 on, 0. 2 off, 0. 4 on, 0. 2 off, 0. 8 on, 4. 0 off 0. 3 on, 0. 2 off, 1. 0 on, 0. 2 off, 0. 3 on, 4. 0 off 1. 0 on, 0. 5 off, 1. 0 on, 3. 5 off 0. 5 on, 0. 5 off, 0. 5 on, 0. 5 off, 1. 0 on, 3. 0 off 0. 5 on, 0. 5 off, 1. 0 on, 0. 5 off, 0. 5 on, 3. 0 off 0. 4 on, 0. 6 off, 0. 4 on, 4. 6 off 1. 5 on, 0. 5 off, 0. 5 on, 3. 5 off Select the "Ring Pattern" and then press [Enter]. [. . . ] A Muratec unit may offer one or more of these resolution levels: Thermal (paper) printing -- A thermal head heats chemically treated, thermally sensitive paper in patterns conforming to the image the machine has scanned, creating a printed image. Thermal paper's tendency to discolor and fade, in addition to its curliness and the usual difficulty in writing on it, have made this method considerably less popular than plainpaper fax printing -- particularly as plain-paper fax machines have dropped sharply in price. Appendix & index Limited warranty This warranty is made by Muratec America, Inc. This warranty is valid only on Muratec products purchased and used in the United States of America. This warranty applies to the product only while owned and used by the original purchaser ("Customer"). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MURATEC M-4700




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MURATEC M-4700 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.