User manual MURATEC F-38

[. . . ] If your machine receives a fax message or if any key is pressed your machine will automatically wake up. The time for the machine to enter the Energy saving mode can be selected from 1 to 240 minutes. For details, see "EasyStart, " page 1. 20. Super G3 is an extension of Group 3 fax technology standards, allowing the use of high-speed ITU-T V. 34 modems for 33. 6 Kbps transmission and high-speed protocols for rapid handshaking. JBIG -- Joint Bi-level Image experts Group, the new ITU-T standard image data compression method. [. . . ] If you choose "On", this box can be polled only once per document. OFF: Your machine does not erase a document from the box when it's polled. As long as your machine holds AC power and you do not erase the document from the box, the document is available indefinitely for polling. If you want to erase any number, move the cursor on it and press [Erase]. When you finish to review, press [Return] to return to the previous display. 40 Press ENTER. The LCD shows: 35 36 Using the cursor key, select the mode you want. Press ENTER and skip to step 46. If you chose Relay: The LCD shows: 41 Select "TTI Type" and press ENTER. The LCD shows: 37 38 Enter the box name, the sub-address and the password for the F-Code box as described in steps 8-17. The LCD shows: The machine asks for the type of TTI you want to appear on the faxes that are relayed to other callers. · Sender -- Relay the document with sender unit's TTI (don't send your TTI). · Both -- Relay the document with both the sender unit's TTI and your TTI. · Yours -- Relay the document with your TTI instead of the sender unit's. 42 43 39 Select "Location" and press ENTER. Your fax machine prints the chosen document(s), then returns to standby mode. Printing a document stored in a bulletin box You can print a document stored in your machine's F-Code bulletin boxes without erasing the document from memory. To print a stored document: Erasing a document stored in a bulletin box To erase a stored document: 1 Press MENU, 4, 2, 0, 2, ENTER The LCD shows: 1 Press MENU, 4, 3, 0, 2, ENTER The LCD shows: 3. 33 Advanced features 2 3 Use the numeric keypad to enter the two-digit number (01-50) of the F-Code bulletin box that stores the document you want to erase. Note: If the F-Code box is storing any documents, the symbol is appeared on the LCD. The LCD shows: Using a security box Printing a document you receive When your fax machine receives a document via ITU-T sub-addressing to an F-Code security box, your machine prints a message to let you know. The message lists: (1) the F-Code box number that received the document, (2) the Box name, (3) the remote machine's TTI (if any), and (4) the file numbers stored in the F-Code box. You then have a certain number of days (see step 19 and 20 on page 3. 29) in which to print out the document before your machine automatically erases it. Note: For this operation to work, two things must be true: · You must know the F-Code security box's two-digit number. To print a received message: 4 5 Use the numeric keypad to enter your F-Code box's four-digit I. D. The LCD shows: 6 7 Use the numeric keypad to enter the file number (01-30) of the document you want to erase. Note: If you want to erase all documents stored in the bulletin box, enter 00 (zero). The LCD shows: 2 3 Use the numeric keypad to enter the two-digit number (01-50) of the F-Code security box that stores the document you want to print. [. . . ] For instructions on programming this information (the "TTI") into your fax machine, see pages 1. 18­1. 20. Type of service Your fax is designed for use on standard-device telephone lines. The fax connects to the telephone line with a standard line called the USOC RJ-11. Connection to telephone-company-provided coin service (central-office-implemented systems). Connection to party line service is subject to State tariffs. AI. 3 Appendix and index Limited warranty This warranty is made by Muratec America, Inc. [. . . ]