User manual MULTICOAT KRETE KOTE

[. . . ] Cracks and imperfections must be repaired and proper expansion joints installed; cleaned and caulked if already existing. BASE COAT APPLICATION ­ TROWELED APPLICATION MULTICOAT KRETE KOTE and TOP COAT 2000 are furnished in 65 lb. bags and field mixed with potable (clean) water in the approximate amount of 13/4 -2 gallons per bag, preferably with a special MULTICOAT Mixing Paddle. [. . . ] bags and field mixed with potable (clean) water in the approximate amount of 13/4 -2 gallons per bag, preferably with a special MULTICOAT Mixing Paddle. Mix vigorously to disperse all lumps and to thoroughly wet all particles, . Adjust to desired consistency by addition of dry material or small amount of water. For best results let Krete Kote or Top Coat stand in bucket for 3-5 minutes, then add a small amount of water and rebreak material. Mixed KRETE KOTE and TOP COAT 2000 are applied by roller, trowel, or squeegie in one coat plus texture coat, or two or more coats plus texture coat, depending on surface condition. FINISH COAT ­ TEXTURED IF DESIRED HOPPER GUN ­ KNOCK DOWN ACRATHANE COLORSEAL With Hopper Gun - Trowel Knock Down to achieve French Lace Texture. Seller's sole obligation shall be to replace material if found to be defective. Seller shall not be liable for any damages, injury, loss, direct or indirect or consequential, resulting from use of its products. Limited warranty available to experienced MULTICOAT Certified Applicators. COVERAGE Each 65 lb. of KRETE KOTE or TOP COAT 2000 as described under "APPLICATION, " will cover approximately 100 sq. Each gallon of ACRATHANE COLORSEAL will cover approximately 150-200 sq. [. . . ] of KRETE KOTE or TOP COAT 2000 as described under "APPLICATION, " will cover approximately 100 sq. Each gallon of ACRATHANE COLORSEAL will cover approximately 150-200 sq. [. . . ]