User manual MULTICOAT CRACKREPAIR

[. . . ] CRACK REPAIR SYSTEM A Premier Crack Repair System for Concrete Restoration. DESCRIPTION AND USE The MULTICOAT SPEED BOND CRACK REPAIR SYSTEM is a unique two component waterbased polyurethane material. [. . . ] (Note: Follow directions on the cartridge carefully when using material). After dispensing, immediately spread SPEED BOND flush with deck surface using a plastic spreader. Allow to harden 30-60 minutes (depends on ambient temperature) then grind SPEED BOND material to lightly abrade surface. Now you are ready to coat over the repaired crack(s) with MULTICOAT Products and Systems. LIGHTLY SAND SURFACE WITH 7" GRINDER OR RUBBING STONE COVERAGE One Speed Bond cartridge will fill approximately 20 linear feet of crack 3/8" wide x 3/8" deep. CRACK IS REPAIRED AND READY TO BE COATED WITH MULTICOAT PRODUCTS AND SYSTEMS LIMITATIONS Do not apply when substrate surface temperature is below 50°F, above 100°F, if ambient temperature is below 50°F or over 100°F and expected to rise, or if precipitation is expected within a 6 hour period. WARRANTY Materials are guaranteed with respect to uniformity and quality within manufacturers' specifications. Seller makes no other warranty, expressed or implied, regarding the use of its products. Since use of the product is beyond the Seller's control, the Buyer assumes all risks of use. [. . . ] East Coast Toll Free: (800) 660-6729 or (304) 768-0017 FAX (304) 768-9738 website: www. multicoatproducts. com E-mail: multiprods@aol. com Available Through: R OD C U TS AT MC1004 P The Coating of the Future. . . Today [. . . ]