User manual MTD OHD-190-180

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MTD OHD-190-180. We hope that this MTD OHD-190-180 user guide will be useful to you.


MTD OHD-190-180 : Download the complete user guide (4697 Ko)

Manual abstract: user guide MTD OHD-190-180

Detailed instructions for use are in the User's Guide.

[. . . ] It will help you assemble, prepare and maintain the unit for best performance. Page 16 Finding and Recording Model Number BEFORE YOU START ASSEMBLING YOUR NEW EQUIPMENT, please locate the model plate and copy the information from it in this Operator’s Manual for future reference. The information on the model plate is very important if you need help from our Customer Support Department or your authorized dealer. You can locate it by looking on the front, left portion of the plastic grass catcher cover as seen below: Model Number Serial Number *Locate the model plate on your bagger and copy the information from it in the space provided above for future reference. [. . . ] NOTE: If the grass collection system is removed for any reason, it is not necessary to remove the support brackets from the tractor. Be sure to insert the hairpin clip in the upper hole to properly secure the bracket assembly to the hitch plate. figure 11 Upper Hole Figure 12 7 Attaching Support Bracket & Bracket Assembly Model Series 700 3 Assembling Support Brackets Model Series 700 1. Locate the four self-tapping screws supplied in your hardware pack (D from Figure 4). Attach the right hand grass catcher support bracket (F1 from Figure 4) using two of the supplied screws in position as shown in Figure 13. Place the left hand grass catcher support bracket (F2 from Figure 4) in position and secure with the other two screws. Insert a shoulder bolt (C in Figure 4) through a bell washer, (B in Figure 4) and insert the bolt through the Inner hole (closest to the frame) on the outside of the support bracket. NOTE: If the grass collection system is removed for any reason, it is not necessary to remove the support brackets from the tractor. Self tap screws Inner Hole Support Bracket Outside of Bracket Figure 13 Attaching The Bracket Assembly NOTE: If the grass collection system is removed for any reason, it is not necessary to remove the support brackets from the tractor. Be sure to insert the hairpin clip in the upper hole to properly secure the bracket assembly to the hitch plate. Remove the two nuts and screws on each side of the mounting bracket holding the hitch plate. Re-insert the four bolts through mounting bracket and hitch plate frame and secure with nuts removed earlier. Use the inner holes (closest to the mounting hooks) on the mounting bracket. Remove the hairpin clip and clevis pin from the hitch plate as seen in Figure 14. Position the hooked ends of the mounting bracket assembly to the outside of the support bracket and over the shoulder bolts on both sides. Reinsert the clevis pin through the aligned holes in both the bracket assembly and the hitch plate and secure with the hairpin clip removed earlier. Be sure to insert the hairpin clip in the upper hole to properly secure the bracket assembly to the hitch plate. clevis Pin Figure 14 Inner holes Figure 15 Upper Hole Figure 16 8 Attaching Grass Bags & Grass Bag Cover 1. Place the support tube in position on the rear of unit by sliding the support tube down through the holes in the left side of the bracket assembly. In this case, install the grass catcher pin from the hardware pack in the available hole. Figure 21 NOTE: The retainer strap is fitted at position A on the discharge chute. However, on older models of tractors, you will have to change the position of the strap depending on the location of the grass catcher pin on the deck. [. . . ] MTD does not extend any warranty for products sold or exported outside of the United States, its possessions and territories, except those sold through MTD’s authorized channels of export distribution. No implied warranty, including any implied warranty of merchantability of fitness for a particular purpose, applies after the applicable period of express written warranty above as to the parts as identified. No other express warranty, whether written or oral, except as mentioned above, given by any person or entity, including a dealer or retailer, with respect to any product, shall bind MTD. During the period of the warranty, the exclusive remedy is repair or replacement of the product as set forth above. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MTD OHD-190-180




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MTD OHD-190-180 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.