User manual MTD OEM-190-679

[. . . ] Front Bumper Kit For FastAttach Compatible 600- and 800-Series Tractors For Compatible 600- and 800-Series Box-Frame Tractors ™ Model OEM-190-679 / 190-679-101 SECTION 1: CALLING CUSTOMER SUPPORT If you have difficulty assembling this product or have any questions regarding the controls, operation or maintenance of this unit, please call the Customer Support Department. [. . . ] Reference to the FRONT indicates the grille end; to the REAR the drawbar end. Cotter Pin Clevis Pin Mounting Bumper to all FastAttach™ Compatible Tractors WARNING: Muffler may be hot!• To mount the bumper to the tractor, hook the notched ends (slots) of the bumper onto the shoulder bolts on the sides of the tractor frame. • Shoulder Bolt Slot Figure 1 Align the holes in the bumper with the holes in the tractor frame and insert the clevis pins through the holes from the outside. 769-00041C. fm (1/25/06) PRINTED IN U. S. A. Mounting Bumper to Box-Frame Lawn Tractor WARNING: Muffler may be hot!NOTE: The front bracket is exploded from the tractor for clarity in Figure 2. • To mount the bumper to the tractor, slide the bumper over the front brackets, aligning the two holes in the bumper over the two upper holes in the bracket. [. . . ] The nuts will not be neccessary. 14. 5 FT-OHP/ 4 N-TH2" E-GO Hex Flange Nut Hex Flange Nut Hex Bolt Tractor Bracket Tractor Bracket Hex Bolt Figure 2 Figure 3 MTD LLC, P. O. [. . . ]