User manual MTD OEM-190-192

[. . . ] Operator’s Manual Triple Bagger Kit Model OEM-190-192 IMPORTANT: Read safety rules and instructions carefully before operating equipment. Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forestcovered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law (Section 4442 of the California Public Resources Code). A spark arrester for the muffler is available through your nearest engine authorized service dealer or contact the service department, P. O. [. . . ] Rapid engagement or braking could cause the front of the machine to lift and rapidly flip over backwards which could cause serious injury. If tires lose traction, disengage the blade(s) and proceed slowly straight down the slope. Do not turn on slopes unless necessary; then, turn slowly and gradually downhill, if possible. The mower could suddenly turn over if a wheel is over the edge of a cliff, ditch, or if an edge caves in. Do not try to stabilize the machine by putting your foot on the ground. Over-speeding may cause the operator to lose control of the machine resulting in serious injury or death. Before cleaning, repairing, or inspecting, make certain the blade(s) and all moving parts have stopped. Disconnect the spark plug wire and ground against the engine to prevent unintended starting. Periodically check to make sure the blades come to 12. 2. 13. 14. complete stop within approximately (5) five seconds after operating the blade disengagement control. If the blades do not stop within the this time frame, your unit should be serviced professionally by an authorized dealer. Check brake operation frequently as it is subjected to wear during normal operation. Check the blade(s) and engine mounting bolts at frequent intervals for proper tightness. Also, visually inspect blade(s) for damage (e. g. , excessive wear, bent, cracked). Replace the blade(s) with the original equipment manufacturer’s (O. E. M. ) blade(s) only, listed in this manual. “Use of parts which do not meet the original equipment specifications may lead to improper performance and compromise safety!” Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing them. Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working condition. Never tamper with the safety interlock system or other safety devices. After striking a foreign object, stop the engine, disconnect the spark plug wire(s) and ground against the engine. Never attempt to make adjustments or repairs to the machine while the engine is running. Grass catcher components and the discharge cover are subject to wear and damage which could expose moving parts or allow objects to be thrown. [. . . ] After 90 days, but within the two year period, normal wear part failures will be covered ONLY IF caused by defects in materials or workmanship of OTHER component parts. Normal wear parts and components include, but are not limited to: batteries, belts, blades, blade adapters, grass bags, rider deck wheels, seats, snow thrower skid shoes, shave plates, auger spiral rubber, and tires. HOW TO OBTAIN SERVICE: Warranty service is available, WITH PROOF OF PURCHASE, through your local authorized service dealer. To locate the dealer in your area, check your Yellow Pages, or contact MTD LLC at P. O. [. . . ]