User manual MTD Z-42

[. . . ] Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service centre. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. [. . . ] For more detailed information about disposal of Your old batteries/ accumulators, please contact Your city office, waste disposal service or the shop where You purchased the product. 1 Getting Started MTD Electronics hereby declares that this/these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC, 2006/95/EC and 2009/125/EC. Contact office for compliance of this product: MTD Electronics Inc. eU Representative , Krijgsman 1 , 1186 DM Amstelveen , The Netherlands Please note that this is NOT a Customer Service contact point. For Customer Service Information, see Warranty Card or contact the dealer that you purchased this product. Indd 4 2012-12-11 10:24:54 Table of Contents 5 Table of Contents 1 Getting Started 3 Operating 13 13 13 14 14 14 14 15 15 15 15 15 16 16 16 17 17 17 17 Basic Operations –  CD/ USB Operations –  Selecting a folder Other Operations –  Programmed Playback –  Displaying file information (ID3 TAG) –  Turn off the sound temporarily Radio Operations –  Listening to the radio –  Improving poor FM reception –  Presetting the Radio Stations –  Deleting all the saved stations –  Seeing information about a Radio station –  Using the Auto Station Programme Memory(ASPM) –  Deleting all saved RDS stations Sound adjustment –  Setting the surround mode Listening to music from your external device Auto Power Down 1 2 Safety Information 6 Unique Features 6 Accessories 6 Playable file Requirement 6 –  MP3/WMA music file requirement 7 –  Compatible USB Devices 7 –  USB device requirement 8 Remote Control 9 Front Panel 10 Back Panel 2 3 2 Connecting 11 11 11 12 12 12 Connecting to speakers –  Connecting the speakers to the unit Antenna Connection Optional Equipment Connection –  USB Connection –  PORT. iN Connection 4 5 4 Troubleshooting 18 Troubleshooting 5 Appendix 19 Trademarks and Licenses 20 Specifications 21 Maintenance 21 –  Handling the Unit 21 –  Notes on Discs Z-42-DU_ADEULLK_ENG. Indd 5 2012-12-11 10:24:54 6 Getting Started Unique Features 1 Getting Started Playable file Requirement MP3/WMA music file requirement MP3/ WMA file compatibility with this unit is limited as follows. Wma” yy CD-ROM file format : ISO 9660/JOLIET yy We recommend that you use “Easy-CD Creator”, which creates an ISO 9660 file system. Yy You have to set the disc format option to [Mastered] in order to make the discs compatible with the MTD players when formatting rewritable discs. When setting the option to Live File System, you cannot use it on MTD players. Track/file Playing after 3 seconds, press Cc on the remote control or C on the unit to go to the beginning of the track/file. Press and hold Cc/vV Searching on the remote control or C/ for a section V on the unit during playback within a track and release it at the point you want to listen to. Press REPEAT(MENU) on the remote control repeatedly, the Playing display will be changed in the repeatedly or following order. randomly RPT1 -> RPT DIR(MP3/WMA only) -> RPT ALL -> RANDOM -> OFF Selecting a folder 1. In stop status, press PRESET/FOLDER W/S on the remote control repeatedly until a desired folder appears. (During playback, if you selecting a folder you want, this step is not neccessay. Directory *ROOT File File_03 File_04 File_05 File_06 File_07 File_08 File_09 File_10 File_01 File_02 yy Files and folders will be presented in order recorded and may be presented differently according to the record circumstances. Yy *ROOT : the first screen you can see when a computer recognize the USB is “ROOT” yy Folders will be presented as the following order; FAT(USB) : FILE_01 -> FILE_02 -> FILE_03 -> FILE_04 -> FILE_05 -> FILE_06 -> FILE_07 -> FILE_08 -> FILE_09 -> FILE_10 CD : FILE_01 -> FILE_02 -> FILE_03 -> FILE_04 -> FILE_05 -> FILE_08 -> FILE_09 -> FILE_06 -> FILE_07 -> FILE_10 Note , , 3 Operating Z-42-DU_ADEULLK_ENG. Indd 13 2012-12-11 10:24:58 14 Operating Other Operations Programmed Playback The program function enables you to store your favorite files from any disc or USB device. The programs are also cleared when the disc or USB device is removed, the unit is powered off or the function is switched to others. Displaying file information (ID3 TAG) While playing an MP3 file containing file information, you can display the information by pressing INFO. [. . . ] The remote control does yy There is an obstacle in the path of the remote control and the unit. 8 kg yy Design and specifications are subject to change without notice. Indd 20 2012-12-11 10:24:59 Appendix 21 Maintenance Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. [. . . ]