User manual MSI WIND TOP AE220-013XEU

[. . . ] Wind Top AE220 All-in-One (AIO) PC MS-AC15 System G52-AC151X1 Preface Contents Copyright Notice iii Trademarks iii Revision iii Upgrade and Warranty iv Acquisition of Replaceable Parts iv Technical Support iv Green Product Features iv Environmental Policy  v Chemical Substances Information v Battery Information v Safety Instructions vi CE Conformity viii FCC-B Radio Frequency Interference Statement viii WEEE Statement ix 1. Overview 1-1 Packing Contents 1-2 System Overview 1-3 System Specifications 1-9 Component Replacement & Upgrade 1-11 ii 2. Getting Started 2-1 Safety & Comfort Tips 2-2 Hardware Setup 2-3 3. System Operations (Windows 7) 3-1 System Booting Setup for the first time 3-2 Network Connection under Windows 3-3 Sound Blaster Cinema (Optional) 3-8 On-Screen Display (OSD) 3-12 Power Management 3-15 System Recovery Tool 3-17 4. [. . . ] It ranges from 0% to 100%, while bigger percentage indicates larger effect typically. Volume Control/ Mute Click on the Speaker ICON to mute & un-mute the Master Volume of the selected audio output device. You can drag the slider left or right to the desired level of master audio volume for their selected audio output device. It ranges from 0% to 100% while bigger percentage indicates larger volume typically. Advanced Setting Click on the Menu button to start your advanced setting: 3-10 ■ ■ ■ ■ Start Sound Blaster Cinema when Windows starts - Check the option if you wish to automatically start Sound Blaster Cinema when Windows starts. Visualization - Check this if you wish to have Visualization to be active. Always On Top - Check this if you wish Sound Blaster Control to be always the top window. - To set the current audio device to the default state, click on the “Restore Default” option then click OK on the Windows dialog box. ■ Wind Top Series ■ Audio Device Selection. . . - To select the desired audio output device to apply the SBX Pro Studio effects. Click on the “Audio Device Selection” option and select the desired output device from the drop down list. Choose the desired language from the drop down list of supported languages. - The About Box shows the version number of the Sound Blaster Cinema Application. Click on OK on the dialog box to close it. ■ ■ ■ 3-11 System Operations (Windows 7) On-Screen Display (OSD) The on-screen display (OSD) allows you to tune the viewing options of the monitor, such as brightness, contrast, positioning, language, etc. Mode / Monitor Power Up / Volume Up System Power Menu / Enter Down / Volume Down 3-12 1. Use the Up and Down buttons to select the desired function menu and press the Menu button to enter. Use the Up and Down buttons to select or tune the values to suit your personal preferences. Adjusting contrast and brightness Adjusting color Wind Top Series Adjusting phase/focus & clock/pitch Adjusting screen position Adjusting signal source Adjusting OSD position & timeout 3-13 Specifying language Scenery mode System Operations (Windows 7) Resetting system Adjusting wide screen mode 2. Press the Up & Down buttons to adjust the system volume. 3-14 3. Press it again to select PC/ HDMI/ monitor off mode. Important Whenever any error takes place and incurs abnormal display or volume malfunction, enter the OSD menu and reset your monitor to restore all settings to manufacturer default for optimal performance. Wind Top Series Power Management Power management of personal computers (PCs) and monitors has the potential to save significant amounts of electricity as well as deliver environmental benefits. To be energy efficient, turn off your display or set your PC to sleep mode after a period of user inactivity.  Power Management in Windows OS ■ [Power Options] in Windows OS allow you to control the power management features of your display, hard drive, and battery. Go to [Start] > [Control Panel] > [System and Security]. Then click on the [Power Options] link. 3-15 Select a power plan that suits your personal needs. You may also fine-tune the settings by clicking [Change plan settings]. System Operations (Windows 7) ■ The Shut Down Computer menu presents the options of Sleep (S3/S4) & Shut Down (S5) for rapid and easy management of your system power.  Power Management through ENERGY STAR qualified monitors (Optional) The power management feature allows the computer to initiate a low-power or “Sleep” mode after a period of user inactivity. When used with an external ENERGY STAR qualified monitor, this feature also supports similar power management features of the monitor. To take advantage of these potential energy savings, the power management feature has been preset to behave in the following ways when the system is operating on AC power: ■ ■ Turn off the display after 15 minutes Initiate Sleep after 30 minutes 3-16  Waking the System Up The computer shall be able to wake up from power saving mode in response to a command from any of the following: ■ ■ ■ ■ the power button, the network (Wake On LAN), the mouse, the keyboard. ■ ■ ■ ■ Turn off the monitor by pressing the LCD power button after a period of user inactivity. Tune the settings in Power Options under Windows OS to optimize your PC’s power management. [. . . ] Check if the system is connected to an electrical outlet and it is turned on. Check if the power cord and all cables are connected firmly. When I turn on my computer, the message “Operating System not found” appears or Windows does not start. 1. Check if there is a non-bootable CD/ DVD inside the optical disk drive. Check Boot Device Priority settings in the BIOS Setup. The system can not be shut down. It is best to shut down your computer using the Shut Down icon in the operating system. [. . . ]