User manual MSI H81M-P32

[. . . ] Copyright Notice Preface The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice. Trademarks All trademarks in this manual are properties of their respective owners. [. . . ] The JFP1 connector is compliant with the Intel Front Panel I/O Connectivity Design Guide. When installing the front panel connectors, please use the optional M-Connector to simplify installation. Plug all the wires from the computer case into the M-Connector and then plug the M-Connector into the motherboard. Video Demonstration Watch the video to learn how to Install front panel connectors. On the connectors coming from the case, pins marked by small triangles are positive wires. Please use the diagrams above and the writing on the optional MConnectors to determine correct connector orientation and placement. The majority of the computer case?s front panel connectors will primarily be plugged into JFP1. 0 Expansion Connectors This connector is designed for connecting high-speed USB peripherals such as USB HDDs, digital cameras, MP3 players, printers, modems, and many others. 2 Note that the VCC and GND pins must be connected correctly to avoid possible damage. V 1 This connector allows you to connect the front audio panel located on your computer case. This connector is compliant with the Intel Front Panel I/O Connectivity Design Guide. Please refer to the TPM security platform manual for more details and usages. LP 1 JBAT1: Clear CMOS Jumper There is CMOS RAM onboard that is external powered from a battery located on the motherboard to save system configuration data. With the CMOS RAM, the system can automatically boot into the operating system (OS) every time it is turned on. If you want to clear the system configuration, set the jumpers to clear the CMOS RAM. 1 1 English Keep Data Clear Data Important You can clear the CMOS RAM by shorting this jumper while the system is off. Do not clear the CMOS RAM while the system is on because it will damage the motherboard. JUSB_PW1, JUSB_PW2: USB Power Jumper This jumper allows you to enable/ disable the ?Wakeup from S3/S4/S5 by USB and PS/2 device?JUSB_PW1 1 1 Enabled JUSB_PW2 1 Disabled (Default) 1 Enabled Disabled (Default) Important If you set the jumper to Enabled, the power supply must be able to provide at least 2A currents. 0 x1 Slot Important When adding or removing expansion cards, always turn off the power supply and unplug the power supply power cable from the power outlet. Read the expansion card?s documentation to check for any necessary additional hardware or software changes. 0 x16 Slot BIOS Setup The default settings offer the optimal performance for system stability in normal conditions. [. . . ] Intel Adaptive Thermal Monitor [Enabled] Enables or disables the Intel adaptive thermal monitor function to protect the CPU from overheating. [Enabled] Throttles down the CPU core clock speed when the CPU is over the adaptive temperature. [Enabled] Detects the idle state of system and reduce CPU power consumption accordingly. C1E Support [Disabled] Enables or disables the C1E function for power-saving in halt state. [. . . ]