User manual MSI B85M-E33

[. . . ] English English Thank you for choosing the H81M-P33/ H81M-E33/ H87M-P33/ H87M-E33/ B85MP33/ B85M-E33 Series (MS-7817 v1. X) Micro-ATX motherboard. The H81M-P33/ H81M-E33/ H87M-P33/ H87M-E33/ B85M-P33/ B85M-E33 Series motherboards are based on Intel H81/ H87/ B85 chipset for optimal system efficiency. Designed to fit the advanced Intel LGA1150 processor, the H81M-P33/ H81M-E33/ H87M-P33/ H87M-E33/ B85M-P33/ B85M-E33 Series motherboards deliver a high performance and professional desktop platform solution. Layout Top : mouse Bottom: keyboard CPUFAN USB2. 0 ports JPWR2 USB3. 0 ports HDMI port (for H81M-E33/ H87M-E33/ B85M-E33) VGA port JUSB_PW1 DIMM1 Top: LAN jack Bottom: USB ports T:Line-In M:Line- Out B:MIC-Int SYSFAN1 PCI _E1 PCI _E2 JBAT1 JCI1 SATA2 JAUD1 JTPM1 JCOM1 JFP2 JFP1 JUSB_PW2 SATA4 JUSB1 SATA3 DIMM2 SATA1 JUSB2 11 JPWR1 SYSFAN2 DVI-D port (for H81M-P33/ H87M-P33/ B85M-P33) Motherboard Specifications CPU Support Chipset ■ 4th Generation Intel® Core™ i7 / Core™ i5 / Core™ i3 / Pentium® / Celeron® processors for LGA 1150 socket ■ Intel® H81/ H87/ B85 Express Chipset ■ ■ ■ ■ 2x DDR3 memory slots supporting up to 16GB Supports DDR3 1600/ 1333/ 1066 MHz Dual channel memory architecture Supports non-ECC, un-buffered memory English Memory Support Expansion Slots Onboard Graphics ■ 1x PCIe x16 slot (optional) ■ 1x PCIe 2. 0 x1 slot ■ 1x HDMI port (optional), supporting a maximum resolution of 2560x1600@60Hz, 24bpp/ 1920x1080@60Hz, 36bpp ■ 1x DVI-D port (optional), supporting a maximum resolution of 1920x1200 @ 60Hz, 24bpp ■ 1x VGA port, supporting a maximum resolution of 1920x1200 @ 60Hz, 24bpp ■ Intel H81/ H87/ B85 Express Chipset - 4x SATA ports (optional) - Supports RAID 0, RAID1, RAID 5 and RAID 10 (optional) - Supports Intel Smart Response Technology (optional)* - Supports Intel Rapid Start Technology (optional)* - Supports Intel Smart Connect Technology (optional)* * Supports Intel Core processors on Windows 7 and Windows 8 ■ Intel H81/ H87/ B85 Express Chipset - 2x USB 3. 0 ports on the back panel - 8x USB 2. 0 ports (4 ports on the back panel, 4 ports available through the internal USB connectors*) ■ Realtek® ALC887 Codec ■ Realtek® RTL8111G Gigabit LAN controller ■ ■ ■ ■ ■ ■ ■ ■ ■ 1x PS/2 keyboard port 1x PS/2 mouse port 4x USB 2. 0 ports 2x USB 3. 0 ports 1x HDMI port (optional) 1x DVI-D port (optional) 1x VGA port 1x LAN (RJ45) port 3x audio jacks Storage USB Audio LAN Back Panel Connectors 12 Internal Connectors ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 1x 24-pin ATX main power connector 1x 4-pin ATX 12V power connector 4x SATA connectors 2x USB 2. 0 connectors (supports additional 4 USB 2. 0 ports) 1x 4-pin CPU fan connector 1x 4-pin system fan connector 1x 3-pin system fan connector 1x Front panel audio connector 2x System panel connectors 1x Chassis Intrusion connector 1x Clear CMOS jumper 2x USB power jumpers BIOS Features Form Factor ■ UEFI AMI BIOS ■ ACPI 5. 0, PnP 1. 0a, SM BIOS 2. 7, DMI 2. 0 ■ Multi-language ■ Micro-ATX Form Factor ■ 8. 9 in. (22. 6 cm x 17. 3 cm) 13 English Optional Specifications Name Specification PCIe x16 slot DVI-D/ HDMI SATA1, SATA2 SATA3, SATA4 BIOS ROM RAID Small Business Advantage Intel Rapid Start Intel Smart Response Intel Smart Connect Name Specification PCIe x16 slot DVI-D/ HDMI SATA1, SATA2 SATA3, SATA4 BIOS ROM RAID Small Business Advantage Intel Rapid Start Intel Smart Response Intel Smart Connect H81M-P33 Gen2 DVI-D SATA 6Gb/s SATA 3Gb/s 64Mb Not supported Not supported Not supported Not supported Not supported H81M-E33 Gen2 HDMI SATA 6Gb/s SATA 3Gb/s 64Mb Not supported Not supported Not supported Not supported Not supported H87M-P33 Gen3 DVI-D SATA 6Gb/s SATA 6Gb/s 128Mb Supported Supported Supported Supported Supported English H87M-E33 Gen3 HDMI SATA 6Gb/s SATA 6Gb/s 128Mb Supported Supported Supported Supported Supported B85M-P33 Gen3 DVI-D SATA 6Gb/s SATA 3Gb/s 128Mb Not supported Supported Supported Not supported Supported B85M-E33 Gen3 HDMI SATA 6Gb/s SATA 3Gb/s 128Mb Not supported Supported Supported Not supported Supported 14 Back Panel H81M-E33/ H87M-E33/ B85M-E33 PS/2 Mouse USB 2. 0 VGA HDMI PS/2 Keyboard USB 3. 0 USB 2. 0 LAN Line-Out Mic H81M-P33/ H87M-P33/ B85M-P33 PS/2 Mouse USB 2. 0 DVI-D VGA LAN Line-In Line-Out Mic PS/2 Keyboard USB 3. 0 USB 2. 0 LAN LED Indicator LINK/ACT LED LED SPEED LED LED Status Off Link/ Activity LED Yellow Blinking Off Speed LED Green Orange Description No link Linked Data activity 10 Mbps connection 100 Mbps connection 1 Gbps connection 15 English Line-In CPU & Heatsink Installation When installing a CPU, always remember to install a CPU heatsink. [. . . ] You may need to run the Setup program when: ■ An error message appears on the screen during the system booting up, and requests you to run SETUP. ■ You want to change the default settings for customized features. English Important • Please load the default settings to restore the optimal system performance and stability if the system becomes unstable after changing BIOS settings. Select the "Restore Defaults" and press <Enter> in BIOS to load the default settings. • If you are unfamiliar with the BIOS settings, we recommend that you keep the default settings to avoid possible system damage or failure booting due to inappropriate BIOS configuration. Entering BIOS Setup Power on the computer and the system will start the Power On Self Test (POST) process. When the message below appears on the screen, please <DEL> key to enter BIOS: Press DEL key to enter Setup Menu, F11 to enter Boot Menu If the message disappears before you respond and you still need to enter BIOS, restart the system by turning the computer OFF then back ON or pressing the RESET button. You may also restart the system by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys. You can click the “GO2BIOS” tab on “MSI Fast Boot” utility screen or press the physical “GO2BIOS" button (optional) on the motherboard to enable the system going to BIOS setup directly at next boot. Click "GO2BIOS" tab on "MSI Fast Boot" utility screen. Important Please be sure to install the “MSI Fast Boot” utility before using it to enter the BIOS setup. 26 Overview After entering BIOS, the following screen is displayed. Temperature monitor Language Model name Virtual OC Genie Button System information Boot device priority bar BIOS menu selection BIOS menu selection Menu display OC Menu Important • Overclocking your PC manually is only recommended for advanced users. • Overclocking is not guaranteed, and if done improperly, can void your warranty or severely damage your hardware. • If you are unfamiliar with overclocking, we advise you to use OC Genie for easy overclocking. 27 English ▶ Current CPU/ DRAM/ Ring Frequency These items show the current frequencies of installed CPU, Memory and Ring. [Dynamic Mode] CPU ratio will be changed dynamically according to the CPU loading. ▶ Adjust CPU Ratio [Auto] Sets the CPU ratio that is used to determine CPU clock speed. This item can only be changed if the processor supports this function. ▶ EIST [Enabled] Enables or disables the Enhanced Intel® SpeedStep Technology. ▶ Intel Turbo Boost [Enabled] Enables or disables the Intel® Turbo Boost. [Enabled] Enables this function to boost CPU performance automatically above rated specifications when system request the highest performance state. ▶ Enhanced Turbo [Auto] Enables or disables Enhanced Turbo function for all CPU cores to boost CPU performance. ▶ Adjusted GT Frequency Shows the adjusted integrated graphics frequency. Please note the overclocking behavior is not guaranteed. English 28 ▶ Adjusted DRAM Frequency Shows the adjusted DRAM frequency. [Auto] DRAM timings will be determined based on SPD (Serial Presence Detect) of installed memory modules. [Link] Allows user to configure the DRAM timing manually for all memory channel. [UnLink] Allows user to configure the DRAM timing manually for respective memory channel. [. . . ] [Enabled] Allows the hardware prefetcher to automatically pre-fetch data and instructions into L2 cache from memory for tuning the CPU performance. ▶ Adjacent Cache Line Prefetch [Enabled] Enables or disables the CPU hardware prefetcher (MLC Spatial prefetcher). [Enabled] Enables adjacent cache line prefetching for reducing the cache latency time and tuning the performance to the specific application. 30 English [Disabled] Enables the requested cache line only. ▶ CPU AES Instructions [Enabled] Enables or disables the CPU AES (Advanced Encryption Standard-New Instructions) support. [. . . ]