User manual MR HANDSFREE CAR KIT GENIUS

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MR HANDSFREE CAR KIT GENIUS. We hope that this MR HANDSFREE CAR KIT GENIUS user guide will be useful to you.


MR HANDSFREE CAR KIT GENIUS : Download the complete user guide (5016 Ko)

Manual abstract: user guide MR HANDSFREE CAR KIT GENIUS

Detailed instructions for use are in the User's Guide.

[. . . ] in most cars , the universal mounting bracket is placed on the right side of the gear-control console. Check for a location in your car (close to the gear-control console) where the mounting bracket fits and where it is comfortable for use. Make sure that the location in your car where you want to install your mr Handsfree Genius is free from dust and dirt. Put the upper part of the mounting bracket , with the adhesive tape, over the edge of the console. [. . . ] Make sure that the holes of the microphone are directed towards the driver and not towards the Genius main unit. Insert the microphone plug into the socket of the Genius main unit holder. by default , the button on the microphone is in OUT-position (unpressed position). Only for some telephones it is necessary to put the button in the ON-position. Turn the big screw in the centre of the main unit holder to the left to make movements possible. Fasten the big screw to the right to fix the main unit holder in the preferred position. Warning: Do not move the main unit holder without unfastening the big screw. Release the cramps of the Genius main unit by pushing the button between the cramps. Close the cramps in a way that they hold the telephone and it therefore cannot fall. Take the telephone out of the holder without releasing the cramps by sliding the telephone to the top side. To insert the telephone, you slide it from the top side between the cramps of the Genius. You only have to adjust the cramps to the size of your telephone once. Activate the power supply to the Genius by starting the engine and connecting the cigarette plug (if applicable). Connect the Genius connector to the mobile phone after the power supply is activated. Important: During installation always make sure that the power cord is inserted into the cigarette lighter and power provided before connecting your mobile phone. The connection of your mobile phone should ALWAYS be the LAST step of complete mr Handsfree installation. When the two buttons are pressed together, the main unit can be taken of the Genius main unit holder. This way you can remove all important electronics and avoid being robbed. The mr Handsfree `Special Brand' mobile phone connector can be obtained by mail or directly from your local supplier. â· Due to the `Special Brand' mobile phone connector which can be ordered separately for each mobile phone model (Nokia, Ericsson etc. [. . . ] The device does not There is a bad conneccharge, you don't tion between the main hear the caller, the unit and the holder. It is possible that your Please place the mr Handsfree car radio does not have Genius at least 20 cm from the enough RF distortions car radio. Use for connection contact Power Adapter and clips which correspond to the Cigarette lighter jack. Clean the contact of the Cigarette lighter jack and smaller diameter than Radio through Additional Adapter. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MR HANDSFREE CAR KIT GENIUS




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MR HANDSFREE CAR KIT GENIUS will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.