User manual MR HANDSFREE BLUE XS

[. . . ] When the battery is fully charged, the red indicator (1) on the headset will turn off and the blue indicator (1) will turn on. Power on/off Answer / end / transfer calls / voice dialing Pairing Headset action During pairing Pairing successful Standby-mode Battery under charging Battery charged Red/Blue indicator Blue LED lights up constantly Blue LED starts flashing every 4 seconds Blue LED flashes every 4 seconds Red LED is turned on constantly Red LED turns off and blue LED turns on You will hear 1 short tone and the blue indicator (1) of the headset You will hear 1 short tone and the blue indicator (1) of the headset lights up shortly. You are required to pair the Blue XS headset with your mobile phone once before using it. [. . . ] ⷠIf one of the two devices has been out of range: Make sure that both devices are within working range and press the MF-button (2) once. Note: For all mobile phone types, it is recommended to set "Trust" or "Authorized" for Blue XS in the Bluetooth® menu of your mobile phone. Please refer to the manual of your mobile phone for more detailed information. You can disconnect the headset from your phone when, for example, you want to use another Bluetooth® device with your phone. Once the Blue XS headset is successfully paired with your mobile phone, you can use it to make and receive calls. The Blue XS headset can be used with voice dialing and redial if your mobile phone supports this feature. Press the MF-button (2), wait for a beep and say the name of the person you want to call. Using the phone keys to make a call: Enter and dial the number on the mobile phone as you normally do. Once the call has been set up, the sound will Press and hold the volume-button - (3) for 3 seconds to redial the last number you called. When the Blue XS headset is turned on and there is an incoming call, you will hear a musical tone. Press the MFbutton (2) to answer the call or press and hold the MF-button (2) for 3 seconds to reject the call. When the headset is turned off, press and hold the MF-button (2) for 5 seconds to turn the headset on. Note: Due to the different design of some mobile phones, an auto-disconnect may happen even when the Blue XS headset is turned on. In that case, the headset won't ring when there is an incoming call. Press and hold the MF-button (2) until you hear a beep to transfer the call to the mobile phone while talking on the headset. If you want to transfer the call back to the headset, press the MF-button (2) again for 5 seconds. Press and hold the MF-button (2) for 3 seconds to switch to a second call during a call. This function only works when your mobile phone service provider provides this service (check with your network provider). [. . . ] The headset will appear as "Blue XS" on your mobile phone after having been found by your mobile phone. the performance of the headset will be affected by two factors: · Whether your mobile phone is in a good signal area. If your mobile phone is in weak signal area, you won't hear clearly with the headset. [. . . ]