User manual MR HANDSFREE BLUE TWIN

[. . . ] G When the battery is fully charged, the red indicator (4) on the headset will turn off and the purple indicator will turn on. Power on/off Answer / end / transfer calls / redial Pairing Headset action During pairing Pairing successful Standby-mode Battery under charging Battery charged indicator Purple LED lights up constantly Red LED starts flashing every 4 seconds Red LED lights up every 4 seconds Red LED is turned on constantly Red LED turns off and purple LED turns on G You will hear 1 short tone and the purple indicator (4) of the headset flashes. G You will hear 1 short tone and the purple indicator (4) of the headset lights 2 times shortly up. [. . . ] You can disconnect the headset from your phone when, for example, you want to use another Bluetooth® device with your phone. Option 1: wearing the headset on the ear (see iLLustration ii) You can wear the Blue Twin on your ear, by attaching the ear plug (1) to the headset. You can also use the ear hook to find the most comfortable fit for your ear. Option 2: wearing the headset on your clothes (see iLLustration iii) Attach the clothing clip (9) to a piece of clothing as shown in ILLUSTRATION III. Now place the speaker (10) in your ear, so that you can start making phone calls. As soon as you finished making phone calls, you can also easily clip the speaker to a piece of clothing. Once the Blue Twin headset is successfully paired with your mobile phone, you can use it to make and receive calls. The Blue Twin headset can be used with voice dialing if your mobile phone supports this feature. Press the MF-button (3), wait for a beep and say the name of the person you want to call. Using the phone keys to make a call: Enter and dial the number on the mobile phone as you normally do. G Once the call has been set up, the sound will be transmitted to your headset automatically. When the Blue Twin headset is turned on and there is an incoming call, you will hear a musical tone. G Press the MFbutton (3) to answer the call or press and hold the MF-button (3) for 3 seconds to reject the call. When the headset is turned off, press and hold the MF-button (3) for 5 seconds to turn the headset on. G To disable the Mute function, press the Volume-button (8) again until you hear a beep. Press and hold the MF-button (3) until you hear a beep to transfer the call to the mobile phone while talking on the headset. G If you want to transfer the call back to the headset, press the MF-button (3) again for 5 seconds. Press and hold the MF-button (3) for 3 seconds to switch to a second call during a call. [. . . ] The headset will appear as "Blue Twin" on your mobile phone after having been found by your mobile phone. the performance of the headset will be affected by two factors: · Whether your mobile phone is in a good signal area. If your mobile phone is in weak signal area, you won't hear clearly with the headset. [. . . ]