User manual MR HANDSFREE BLUE MINI

[. . . ] When the battery is fully charged, the red indicator (4) on the headset will turn off. When you hear 5 short beeps through the speaker of the headset, repeated every 20 seconds, the headset is running on low battery. Charge the headset for 2 hours until the red indicator (4) will turn off. [. . . ] In some cases the Blue Mini can be disconnected from your phone and you will need to restore the connection. If the mobile phone has been switched off: Turn on the mobile phone and restore the connection via the phone's menu. ⷠIf one of the two devices has been out of range: Make sure that both devices are within working range and press the MF-button (3) once. Note: For all mobile phone types, it is recommended to set "Trust" or "Authorized" for Blue Mini in the Bluetooth® menu of your mobile phone. Please refer to the manual of your mobile phone for more detailed information. You can disconnect the headset from your phone when, for example, you want to use another Bluetooth® device with your phone. Once the Blue Mini headset is successfully paired with your mobile phone, you can use it to make and receive calls. The Blue Mini headset can be used with voice dialing if your mobile phone supports this feature. Press the MF-button (3), wait for a beep and say the name of the person you want to call. Using the phone keys to make a call: Enter and dial the number on the mobile phone as you normally do. Once the call has been set up, the sound will Press and hold the MF-button (3) for 1 second to redial the last number you called. When the Blue Mini headset is turned on and there is an incoming call, you will hear a musical tone. Press the MFbutton (3) to answer the call or press and hold the MF-button (3) for 3 seconds to reject the call. When the headset is turned off, press and hold the MF-button (3) for 5 seconds to turn the headset on. Note: Due to the different design of some mobile phones, an auto-disconnect may happen even when the Blue Mini headset is turned on. In that case, the headset won't ring when there is an incoming call. Press and hold the MF-button (3) until you hear a beep to transfer the call to the mobile phone while talking on the headset. If you want to transfer the call back to the headset, press the MF-button (3) again for 5 seconds. [. . . ] The headset will appear as "Blue Mini" on your mobile phone after having been found by your mobile phone. the performance of the headset will be affected by two factors: · Whether your mobile phone is in a good signal area. If your mobile phone is in weak signal area, you won't hear clearly with the headset. [. . . ]