User manual MR HANDSFREE BLUE-CHAMELEON

[. . . ] When you hear 5 short beeps through the speaker of the headset, repeated every 20 seconds, the headset is running on low battery. Charge the headset for 2 hours until the blue indicator (4) will turn off. The headset has to be recharged every two months, when it is not in use during a long time. Power on/off Answer / end / transfer calls / put calls on hold Pairing Headset action Power off Pairing-mode Pairing succesful Standby-mode Charging battery Battery charged Blue indicator Off Lights up constantly Flashes 10 x quickly Flashes every 5 seconds Lights up constantly Off You will hear a series of 4 tones (from low to high) and the The headset is now turned on. [. . . ] The different devices are stored in a list in the internal memory of the headset. If you wish to pair more than 8 devices, the less recent paired device will be automatically deleted from the list. If you want to connect the headset with another device of this list, you have to start the procedure from this device. Once the Blue Chameleon headset is successfully paired with your mobile phone, you can use it to make and receive calls. The Blue Chameleon headset can be used with voice dialing if your mobile phone supports this feature. Press the MF-button (3), wait for a beep and say the name of the person you want to call. Using the phone keys to make a call: Enter and dial the number on the mobile phone as you normally do. Once the call has been set up, the Press and hold the MF-button (3) for 3 seconds to redial the last number you called. When the Blue Chameleon headset is turned on and there is an incoming call, you will hear a musical tone and the blue indicator (4) will change to a quick-flashing mode. Press the MF-button (3) to answer the call or press and hold the MF-button (3) for 3 seconds to reject the call. When the headset is turned off, press and hold the MF-button (3) for 3 seconds to turn the headset on. Note: Due to the different design of some mobile phones, an auto-disconnect may happen even when the Blue Chameleon headset is turned on. In that case, the headset won't ring when there is an incoming call. Mute function, press the Volume-button (2/8) once again until you hear a beep. Press and hold the MF-button (3) until you hear a series of 4 tones (from high to low) to transfer the call to the mobile phone while talking on the headset. If you want to transfer the call back to the headset, press the MF-button (3) again for 3 seconds. Press and hold the MF-button (3) for 3 seconds to switch to a second call during a call. This function only works when your mobile phone service provider provides this service (check with your network provider). [. . . ] The Blue Chameleon headset is turned The blue LED indicator flashes in Standby-mode every 5 seconds. If after 5 minutes no action is taken, the blue LED indicator will on and is paired, but the blue LED indicator doesn't light up. Other trademarks and trade names are those of their respective owners. Appuyez sur le bouton MF (3) pendant 3 secondes pour basculer sur le second appel si un second appel arrive quand vous répondez déja à un appel. [. . . ]