User manual MR COFFEE FTX23

[. . . ] Please save these instructions and refer to them for cleaning and care tips. A short power supply cord is provided to reduce the hazards resulting from a person or pet becoming entangled in, or tripping over, a longer cord. An extension cord may be purchased and used if care is exercised in its use. If an extension cord is used, the marked electrical rating of the extension cord must be at least 10 amps and 120 volts. [. . . ] Make sure that your 1st cup of coffee is as good as can be by cleaning your Mr. Wash the bean hopper and grinding chamber parts with warm soapy water. (Never use abrasive cleansers, steel wool pads or other abrasive materials. Never immerse the Burr Mill itself in water, in any other liquid or place in the dishwasher. Install the Bean Hopper onto the unit and turn clockwise (several rotations-will hear clicking as unit gets tighter) until it stops with the grind size indicator on Fine (Figure 1). Please chamber lid back on grinder chamber and then install into unit, tightly locking into place. NOTE: If all Bean Hopper and Grinding Chamber parts are not tightly in place correctly, the safety switches within the machine will not allow the grinder to work. Set the Timer to 3 cups, this will keep the unit ON enough time to grind the finer grounds required. Set the Timer to 5 cups, this will keep the unit ON enough time to grind the finer grounds required. â· Singimpropermediumorcoarsecoffeegrindingsettingsmightaffectthetasteofthe U brewed espresso coffee, because the optimum coffee extraction is not achieved. If you like a strong cup of espresso, make sure the grind setting is fine. Using coarser grounds than required for brewing coffee in an automatic drip coffee maker might cause an overflow of the paper filter and/or the brew basket. If this happens, use more coffee grounds to obtain the desired result. For a regular or stronger cup of coffee, adjust the grind setting to a medium to fine setting. When a finer setting is required to brew espresso or cappuccino, please grind the amount of coffee grounds recommended by your product manufacturer. After using, open the grinder to the coarsest setting and run empty to clear the grinding path. Remember to always clean your Burr Mill before using it for the first time. Then, to ensure optimal mill function and durability, clean it regularly following these simple steps: 1. (Never use abrasive cleansers, steel wool pads or other abrasive materials. Never immerse the Burr Mill itself in water, in any other liquid or place in the dishwasher. Install the Bean Hopper onto the unit and turn clockwise (several rotations-will hear clicking as unit gets tighter) until it stops with the grind size indicator on Fine. Place chamber lid back on grinder chamber and then install into unit, tightly locking into place. [. . . ] JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition. Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty. jCS disclaims all other warranties , conditions or representations , express , implied , statutory or otherwise. JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party. [. . . ]