User manual MR COFFEE FT SERIES

[. . . ] To reduce the risk of fire, electric shock and/or injury to persons, basic safety precautions should always be followed when using electrical appliances, including the following: 1. To protect against electric shock, do not immerse the power cord, power plug or coffeemaker in water or in any other liquid. Close adult supervision is necessary when this appliance is used by or near children. Turn the coffeemaker OFF and unplug the power cord from the power source when the coffeemaker and clock are not in use and before cleaning. [. . . ] This carbon-based water filter improves the taste of your coffee by removing up to 97% of the chlorine from the water you may use to brew your coffee. COFFEE® Filtration Friendly symbol on the bottom of your filter basket. Align the red indicator on the frame to the letter that corresponds with the month that you are using the disk for the first time. NOTE: For optimum results, use the water filtration system with a permanent filter. When you are done brewing your coffee, rinse the water filter with fresh water. To replace the water filter disks, twist the gray disk cover from your water filtration system. Insert the new disk into the frame and twist the cover back into place. NOTE: If using paper filters, it is important that the sides of the filter fit flush against the side of the filter basket. If filter collapse occurs, dampen the filter before placing in the filter basket and adding ground coffee and water. Add the desired amount of coffee and gently shake to level the coffee. After completing the steps in the Adding Water and Coffee section and with the glass decanter and the filter basket securely in place, turn the coffeemaker on by pressing the SELECT button once. The BREW NOW green light will turn on to signal that the coffeemaker is on and brewing (Figure 6). To enjoy a more full flavored cup of coffee, press the Brew Strength button once. The coffeemaker will remain in the Brew Strength you have selected until you change it back to regular strength by pressing the Brew Strength button or until you unplug the machine (Figure 7). After the used coffee grounds have cooled, carefully remove the filter basket and discard them. COFFEE® water filter in the basket, making sure that the side marked "this side up" faces you and that the water filter is level. Be sure the removable filter basket is properly centered and all the way down in the brew basket and close the lid. Fill the decanter with cold, fresh water to the desired capacity (1 cup equals 5 ounces) For easy and accurate filling, the water markings on the glass decanter and on the dual water windows show the amount of water needed to make the corresponding desired number of cups. Do not fill past the "12 cup MAX line" or water will flow out of the overfill hole in the back of the coffeemaker. The amount of coffee brewed will always be slightly less than the amount of water poured in the water reservoir. Lift the pour through reservoir lid and pour the water into the water reservoir. NOTE: Make sure the decanter is fully placed on the warming plate or the water and the grounds will overflow from the filter basket. [. . . ] If you are unable to find a replacement, please visit us online at www. , doing business as Jarden Consumer Solutions, or if in Canada, Sunbeam Corporation (Canada) Limited, doing business as Jarden Consumer Solutions, (collectively "JCS") warrants that for a period of one year from the date of purchase, this product will be free from defects in material and workmanship. JCS, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. [. . . ]