User manual MOUNTFIELD S461

[. . . ] Attach the upper part (4) using the screws (5) supplied, ensuring that the spiral (6) of the starter cable is in the correct position. 4 When you have finishing mowing, release the brake lever (1) and disconnect the spark plug cap (2). WAIT FOR THE BLADE TO STOP before carrying out any type of work on the machine. [. . . ] Should you have any doubts or problems, do not hesitate to contact your nearest Service Centre or your Dealer. 2 The blade brake is controlled by the lever (1), which should be held against the handle when starting and using the lawnmower. 3 In power-driven models, draw the lever (1) towards the handle for forward movement. IMPORTANT: Before starting the motor for the first time, carefully read the instructions as set out in the engine handbook. Acoustic power level according to EEC directive 2000/14/CE Mark of conformity according to EEC directive 98/37 Year of manufacture Lawnmower type Serial number Name and address of Manufacturer Chassis Engine Blade Stone-guard Grass-catcher Handle Throttle control Engine brake lever Drive engagement lever 1) Toujours porter des chaussures résistantes et des pantalons longs pendant la tonte. SAFETY REQUIREMENTS - Your lawnmower should be used with due care and attention. Symbols have therefore been placed on various parts of the machine to remind you of the main precautions to be taken. You are also asked to carefully read the safety regulations in the applicable chapter of this handbook. Warning: Remove the spark plug lead and read instructions before carrying out any repair or maintenance. 2) Only use the lawnmower for the purpose for which it was designed, i. 3) Never allow children or people unfamiliar with these instructions to use the lawnmower. 4) Never use the lawnmower: ­ When people, especially children, or pets are nearby. ­ If the operator has taken medicine or substances that can affect his ability to react and concentrate. 5) Remember that the operator or user is responsible for accidents or hazards occurring to other people or their property. 2) Thoroughly inspect the area where the equipment is to be used and remove all objects which may be thrown by the machine or damage the cutter assembly and the engine (stones, sticks, metal wire, bones, etc. Engine fuel is highly flammable: ­ Store fuel in containers specifically designed for this purpose. [. . . ] For safety reasons, these jobs are best carried out at a specialized centre. 9) For reasons of safety, do not use the equipment with worn or damaged parts. Parts that are not of the same quality can damage the equipment and be dangerous for your safety. [. . . ]