User manual MORPHY RICHARDS LUXURY HEATED OVERBLANKET BEDDING 75310

[. . . ] · · To store, fold carefully and place back into original packaging. Do not crease the appliance by placing items on top of it during storage. Do not dry clean the blanket, follow washing instructions on the label attached to the blanket and the details that relate to your blanket. · Personal safety · WARNING: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. [. . . ] These can be used to sew it to the duvet with a simple stitch to help prevent the blanket from moving inside the duvet cover. If the duvet cover is smaller than normal size, it is permissable for the side edges of the overblanket (no more than 3" or 75mm) to be folded over to allow it to fit inside the duvet cover. WARNING: On no account should the central, heated area of the blanket be folded for this purpose. The electric lead should be located at the open end of the duvet cover at the bottom of the bed. · 2 Under the duvet cover 1 The bed should be made as normal, with a bottom sheet covering the mattress then a top sheet above the bed occupant, then the heated overblanket, then the duvet or covers A. Fold the top sheet over the top edge of the blanket and tuck in the sides. WARNING: Do not fold over the top part of the blanket or tuck in any wired parts. · 2 A Heated overblanket B Heated overblanket 5 75310 rev2 11/1/08 15:33 Page 7 / fl <B ¤ <A > fi FEATURES / LCD screen with back light. < A Down Arrow B Up Arrow > Slider switch OFF, ON, SLEEP TIMER fi Boost button. fl Mode button Blanket active LED 6 Helplines: 0845 077 7700 (UK) 1800 409 119 (Republic of Ireland) 75310 rev2 11/1/08 15:33 Page 8 HOW TO USE 1 Ensure the blanket is fitted to the bed correctly. Plug the power lead into the closest socket, using an extension lead, if needed, to ensure that the lead is not stretched. 1 2 All night use (manual) NOTE: Blankets are perfectly safe to be used all night. Select the `ON' position Using the up and down buttons, select your desired heat level (1-4). This setting will provide safe and comfortable heat to sleep on all night. WARNING: Always ensure that the slider switch is moved to the OFF position when you get up the next day, or after airing the bed. D C CLOCK 2 7. 30 PM Start up 1 When plugged in, the red power LED will illuminate. Select the appropriate hour, AM/PM, by using the down arrow <A or the up arrow <B. Press mode again and the clock will be set A. · · ON 7. 30 PM 3 2 Boost button At any time during use, if the boost button fi is pressed, the switch will increase by two heat levels, for 30 minutes E. If, within this 30 minutes, the boost button is pressed again, it will revert to the original setting. This feature can be used any number of times during use. BOOST Heating the bed 1 Move the slider switch to the `ON' position, the green LED will illiuminate and heat level 1 is automatically selected. Select the heat required using the up and down arrow buttons level 1-9 B. NOTE: Make sure when you get into bed that the blanket is switched off, or reduced to a level suitable for all night use (1-4). 1 E ON 7. 30 PM 4 2 Sleep button Move the slider switch to sleep position. [. . . ] To qualify for the 3 year guarantee, the appliance must have been used according to the manufacturer's instructions. 3 1 EXCLUSIONS Morphy Richards shall not be liable to replace the goods under the terms of the guarantee where: The fault has been caused or is attributable to accidental use, misuse, negligent use or used contrary to the manufacturer's recommendations or where the fault has been caused by power surges or damage caused in transit. The appliance has been used on a voltage supply other than that stamped on the products. Morphy Richards are not liable to carry out any type of servicing work, under the guarantee. [. . . ]