User manual MORPHY RICHARDS LATITUDE AND FOOD FUSION FOOD PROCESSOR REV 3

[. . . ] This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. · The use of attachments or tools not recommended or sold by Morphy Richards may cause fire, electric shock or injury. Unplug from the outlet when not in use, or when left unattended, and before assembling, disassembling or cleaning. Do not use the appliance for anything other than it's intended purpose. · · Product specific safety · WARNING: The processor blades are very sharp. [. . . ] Fit the lid to the processor bowl by aligning the indicator on the lid to the right hand side of the handle and then rotate clockwise, until the lid clicks firmly into place C. They should only be removed to insert food D. A / ¤ Chopping blade 1 2 Fit the processor bowl as detailed previously. Fit the chopping blade over the motor drive, and fit firmly into place F. Always handle the chopping blade by it's central plastic section. Fit the lid and click into place as detailed in the `Setting up' section. If the processor does not come on, check that the processor lid is correctly fitted. WARNING: For safety, always use the food pusher when putting food into the feeder tube. When processing small pieces of food, unlock and use the small food pusher, leaving the large pusher in place in the lid H. WARNING: Do not use the small food pusher without the large food pusher being in place in the lid feed tube. 7 When the processing is complete, remove the blade from the bowl before removing the processed food. B 4 C 5 D 6 FITTING AND USING THE TOOLS In general, all attachments (with the exception of the mini processor bowl and small blade) which are fitted within the processor bowl, must be firmly attached to the detachable drive shaft. Always adjust the attachments until you are sure that they are correctly fitted. Detachable drive shaft Insert attachments over the top of the detachable drive shaft and ensure that they are securely clicked into place. Then remove the blade covers (if applicable), taking care, as the blades are sharp E. 5 E F G H www. morphyrichards. com 5 48950 Rev 3 30/5/08 10:04 Page 6 Dough blade 1 Fit the processor bowl into place as described in the `Setting up' section. Turn the processor on and operate until the dough has formed into a small ball. IMPORTANT: When kneading dough, do not operate the machine longer than 30 seconds. Afterwards, wait at least 2 minutes before operating the machine again. WARNING: For safety, always leave the pusher in place whilst operating the processor. Whisk attachment 1 Fit the processor bowl as detailed previously in the `Setting up' section. Fit the lid and food pusher and click into place as detailed in the `Setting up' section. 3 1 4 Slicing & Chopping There is a choice of blades for slicing and shredding. Place the blade of your choice on top of the detachable drive shaft, holding the blade by the centre grip. Fit the lid and click into place as detailed in the `Setting up' section. [. . . ] This guarantee is valid in the UK and Ireland only. 3 4 5 6 · YOUR TWO YEAR GUARANTEE It is important to retain the retailer's receipt as proof of purchase. Please quote the following information if the product develops a fault. All Morphy Richards products are individually tested before leaving the factory. In the unlikely event of any appliance proving to be faulty within 28 days of purchase, it should be returned to the place of purchase for it to be replaced. [. . . ]