User manual MORPHY RICHARDS IB70505

[. . . ] If the fault develops after 28 days and within 24 months of original purchase, you should take the appliance to your nearest service agent. A list containing details of your nearest service agent is included with your appliance but please contact the helpline quoting Model number and Serial number should you require further assistance, Repair or replacement of the product is subject to the following exclusions (see Exclusions). If you suspect a fault, follow the simple checks detailed below before returning the appliance or calling the helpline: 1 -Check the plug is firmly in the socket and the supply is switched on. To qualify for the 2 year parts and labour guarantee the appliance must have been used according to the manufacturers instructions. The After Sales Division, Morphy Richards Ltd, Mexborough, South Yorkshire, England, S64 8AJ Helpline (office hours): UK (local rate) 08450 777700 Important Safeguards This product has been designed with your safety in mind. [. . . ] The wire which is coloured blue must be connected to the terminal which is marked with the letter `N' or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter `L' or coloured red. Each wire must be properly connected to the appropriate terminal pin of suitable plug and the outer sheath of the mains lead securely retained by the anchorage arrangement of the plug. In case of doubt the plug should be fitted by a qualified electrician or competent person as the guarantee offered on this product does not cover any fault in the plug or damage caused to the appliance as a result. European conformity information This product conforms to the following European Directives: low voltage 73/23/EEC, EMC 89/336/EEC and CE Marking 93/68/EEC 2 Features 1 2 3 4 5 6 7 8 9 10 11 12 13 Filler cap Heater On/off switch 1 Steam On/off switch Machine socket 9 5 10 2 3 Carrying handle Flexible Hose Hose plug Hose handle Extension tube Release button Handle with remote steam control Handle control steam switch Locking mechanism (safety lock) 14 8 6 11 13 12 7 4 15 Standard Accessories 14 15 16 17 18 19 20 21 Cotton towel Funnel Large floor brush Brush connector Jet nozzle Round bristle brush (metallic) Round bristle brush (nylon) Hand held squeegee with big and small blades 23 16 19 20 18 17 21 Luxury Optional Accessories 22 23 24 25 26 22 24 Integrated Window cleaner Triangular brush Wall paper stripper Professional Iron 25 Iron Pad 26 3 SETTING UP YOUR STEAM CLEANER Filling the boiler Unscrew the filler cap (1) anti clockwise Fill the boiler with a maximum of 1. 8 litres of water by using the funnel (15) provided (Fig A) The accessories vary per machine The round brushes (19 & 20) can be attached to the jet nozzle. To join the extension tubes together, slide one tube into the other until it locks into place. (Fig D) A Do not use any detergents Screw the filler cap (1) clockwise until finger tight. Attaching Hose and Accessories Pull down flap on the front of the machine socket (4). Insert the plug on the end of the hose (7) into the machine socket (4) with button side facing up, and push firmly until it clicks into place. (Fig B) D Some tasks may be easier with only one tube fitted or none at all. To connect the desired accessory directly to the steam handle, slide the handle into the accessory head until it locks into place. When using the large floor brush (16) (or the triangular brush (23), the brush connector (17) needs to be fitted to the brush first, in order to attach the same to the extension tube. Push the connector end, holding it upside down, fully into the brush inlet. large floor brush (16), jet nozzle (18), to the extension tube (9) or directly to the handle (8), depending on the application. E 4 2. (Fig F) Refilling When the boiler is empty no steam, or poor quality steam is emitted. The boiler needs to be refilled: Switch off the boiler heater by pressing the on/off button (2) If there is pressure in the boiler, the filler cap (1) will revolve but a safety feature prevents it from being unscrewed. Release any steam pressure in the system using the on/off switch (3) on machine and handle (12). Leave the product with the filler cap off for 10 minutes before filling. Use warm water to reduce heat up time Caution: Do not pour cold water into a very hot boiler as steam and hot water may be blown out of the filling hole and can scald!!!Start operation again (SEE OPERATION SECTION ABOVE) Switching the unit OFF Switch the unit off by means of switches (2) and (3). Remove the hose plug (7) from the unit by pressing the button, holding down the socket flap simultaneously. To avoid deforming the brushes (16 & 23), ensure that the brushes are allowed to cool down before storing. F The fit between the connector and the tubes and/or handle is tight to ensure no steam leaks. It is recommended to keep both parts lubricated to facilitate connecting and disconnecting. [. . . ] Triangular brush (23) * Recommended applications include - smaller washable areas, such as: - kitchen and bathroom surfaces - car interiors - upholstery The triangular brush can be attached to the extension tubes or directly to the steam handle, provided that the brush connector (17) is fitted. Use a putty knife to lift the loosened wall paper, and pull it off completely. * These accessories are available as optional extras, if not supplied with your machine. MAINTENANCE & TROUBLESHOOTING Cleaning the boiler Disconnect from mains and make sure it is cold. [. . . ]