User manual MORPHY RICHARDS IB48490

[. . . ] · Do not place the appliance on or near a hot gas or electric hob, or in a heated oven. · The use of attachments or tools not recommended or sold by Morphy Richards may cause fire, electric shock or injury. · Do not use the processor/blender for other than its intended use. · When using the blender ensure the lid is in place before switching on and do not remove the lid until the blade has stopped rotating. · Processor/blender lid must be on and located correctly for it to work. Electrical requirements Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A. C. [. . . ] 6 Holding the processor lid by the feed tube, fit the lid by rotating clockwise. 7 Ensure that the lid tab has `clicked' into place and the arrows are lined up. 1 Fit the processor bowl as detailed previously. 5 Fit the lid and click into place as detailed in the `Setting up' section. If the processor does not come on, check that the safety cover and processor lid are both correctly fitted. WARNING: For safety always use the food pusher when putting food into the feeder tube. 7 Use the food pusher Ê to add food into the processor bowl through the feeder tube. 8 When the processing is complete, remove the blade from the bowl before removing the processed food. 9 WARNING: After cleaning, always replace the protective cover Í on the metal chopping blade È. 5 Dough blade Î Grating blades Ï Ì Ó 1 Place the blade of your choice on the blade holder Ô. 2 Press both ends of the blade onto the blade holder until it `clicks' into place. 4 Fit the spindle into the hole underneath the blade holder and turn clockwise to lock into position. 5 Fit it over the motor shaft and press firmly into place as indicated. 6 Fit the lid and click into place as detailed in the `Setting up' section. 8 Use the food pusher Ê to add food into the processor bowl through the feeder tube. 1 Fit the processor bowl as detailed previously. 2 Fit the plastic dough blade over the motor shaft and press firmly into place. 4 Fit the lid and click into place as detailed in the `Setting up' section. 7 Turn the processor on selecting maximum speed and proceed until the dough forms into a ball. IMPORTANT: When kneading dough, do not operate the machine longer than 30 seconds. Afterwards wait at least 2 minutes before operating the machine again. WARNING: For safety always leave the pusher in place whilst operating the processor. Whisk attachment Á&Ë Adjustable slicing blade Ú 1 Adjust the slicing blade to the thickness you require and turn anti-clockwise to increase the blades height and clockwise to reduce. 3 Fit it over the motor shaft and press firmly into place as indicated. 4 Fit the lid and click into place as detailed in the `Setting up' section. 6 Fit the large food pusher  into the tube on the processor lid. [. . . ] 4 Where the appliance has been used for hire purposes or non-domestic use. 5 Morphy Richards are not liable to carry out any type of servicing work, under the guarantee. This guarantee does not confer any rights other than those expressly set out above and does not cover any claims for consequential loss or damage. This guarantee is offered as an additional benefit and does not affect your statutory rights as a consumer. [. . . ]