User manual MORPHY RICHARDS IB47470

[. . . ] 6 Plastic filters and glass jugs for all Morphy Richards kettles and coffee makers are not covered by the guarantee. This guarantee does not confer any rights other than those expressly set out above and does not cover any claims for consequential loss or damage. This guarantee is offered as an additional benefit and does not affect your statutory rights as a consumer. All Morphy Richards Products are individually tested before leaving the factory. [. . . ] Ensure that children are aware of the dangers of boiling water and supervise them carefully. 11 Do not fill above the max mark of the water level gauge marked on the jug. 12 Do not immerse the coffee maker itself in water and always ensure the electrical connections are kept dry. 13 Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. 14 The use of attachments or tools not recommended or sold by Morphy Richards may cause fire, electric shock or injury. 15 Do not use abrasive cleaners on the outside of the coffee maker, they may scratch the surface. 18 Do not place the coffee maker or glass jug on a highly polished wooden surface as damage may occur to the surface. 20 Do not place the coffee maker on or near hot surfaces such as a hot plate or radiant rings or near a naked flame. Warning: Do not place the coffee maker onto a metal tray or metal surface whilst in use. SAVE THESE INSTRUCTIONS 2 2 Electrical requirements Features Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A. C. If the socket outlets in your home are not suitable for the plug supplied with this appliance, the plug should be removed and the appropriate one fitted. WARNING: The plug removed from the mains lead, if severed, must be destroyed as a plug with bared flexible cord is hazardous if engaged into a live socket outlet. WARNING: THIS APPLIANCE MUST BE EARTHED Should the fuse in the 13 amp plug require replacement, a BS1362 13 amp fuse must be fitted. Hinged reservoir lid with strength selector Removable permanent mesh filter Removable filter holder Non-drip valve Jug lid Glass jug with water level indicator Hot plate Water level indicator Neon on/off switch The first time you use your coffee maker Before using your coffee maker the first time, operate the coffee maker with water only. 3 General use 1 Lift up the hinged reservoir lid. 2 Fill the glass jug with the required amount of cold water and pour into the reservoir. Do not exceed the maximum level. 6 Slide the jug into the coffee maker ensuring it sits correctly on the hot plate. The jug lid must be in place during the brewing process, otherwise the non-drip valve will not open, causing the filter to flood. 7 Plug the coffee maker in at the wall socket and switch the coffee maker ON. 8 Hot water will start to flow through the coffee grounds and into the glass jug as coffee. [. . . ] DO NOT USE KETTLE DESCALER UNLESS THE PACKET SPECIFICALLY STATES IT IS SUITABLE FOR COFFEE MAKERS. The permanent mesh filter should not be used during descaling. Cleaning care UNPLUG COFFEE MAKER AND ALLOW TO COOL. Don't use a cloth as any residue or lint may be left behind to clog the coffee maker. [. . . ]