User manual MORPHY RICHARDS IB29007

[. . . ] If the optional battery is not installed in case of the AC power failure the clock will flash at 12:00 when power is restored. If the unit is not to be used for a prolonged period, remove the battery to avoid battery leakage. In the interests of environmental safety : dispose of batteries safely. 4 Setting the time 1 2 Press the SET CLOCK WAKE button and the indicator will appear on the display. Press the DOWN button or UP button to adjust the time whilst the clock symbol is displayed. [. . . ] If the cd compartment is empty, the alarm tone will default to the buzzer. 6 Adjusting snooze duration The snooze control temporarily silences the alarm and allows extra sleep time after the alarm has sounded. You can use the SNOOZE feature repeatedly for up to 2 hours, after which time the unit will turn off. 2 Press the UP or DOWN button to set the snooze period (default is 9 minutes). The alarm will repeat after the set period. Stopping the alarm 1 To silence the alarm temporarily: · Press the SNOOZE button and the alarm will sound again when the snooze period is over (see `Adjusting snooze duration' above). To stop alarm from sounding: · Press the OFF button and the alarm will sound again the following day at the set time. To cancel the alarm completely: Press the CANCEL button, then press the WAKE 1 or 2 buttons and the selected alarm will be cancelled. · If you press WAKE 1 or 2 button again, the previous set alarm time/s will be used. Note: If the alarm is uninterrupted it will stop sounding after 2 hours. 2 3 7 Listening to radio 1 2 3 4 Press the RADIO ON / BAND button to switch on the radio. Adjust the VOLUME control to your desired listening level. FM wire aerial To obtain the maximum FM reception fully extend the wire FM aerial (which is located at the rear of the unit) and alter the direction of the wire for best results. To obtain the maximum MW reception rotate the cd clock radio. Automatic station search 1 2 Press and hold the UP button until `UP' is displayed on the display panel and it will automatically search up the radio frequency. Press and hold the DOWN button until `DN' is displayed and it will automatically search down the frequency. Radio presets 1 2 3 4 Refer to `listening to the radio' to tune to the desired radio station. To store the frequency into the memory, press PRESET / SET button, the preset station number will be automatically assigned the next available number and will appear on the display. Press PRESET / SET to confirm your settings. Radio frequency tips · There is a maximum of 11 (10 preset locations and 1 alarm memory location) preset stations that can be stored. · You can also overwrite preset station numbers by pressing PRESET / SET button when listening to the chosen station. Press the PRESET / RECALL button to select the preset to be overwritten and then press PRESET / SET again to confirm. 8 Preset / recall · Press the PRESET / RECALL button repeatedly to move between preset stations when the radio is on. Listening to a compact disc 1 2 3 4 · · · · Press the CD OPEN / CLOSE button to open the cd door. If you have not inserted a cd / or the disc is faulty, the display will show `nd' when you press play. Press the UP or DOWN buttons to search reverse or forward to select a track. Press STOP to stop playback. Repeat function 1 Press the MODE button to repeat all the tracks on the cd, the appear on the display. Random function 1 indicator will Press the MODE button twice to randomly play all the tracks on the cd, the indicator will appear on the display. 1 2 and indicators appear on the Press the MODE button 3 times until the display. [. . . ] The lightning flash with arrowhead symbol within the triangle is a warning sign alerting the user of `dangerous voltage' inside the unit. The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product. To prevent fire or shock hazard do not expose this apparatus to dripping or splashing. 10 Maintenance Do not expose your cd clock radio to extremes of temperature. The product should be kept in a warm environment free from dust and damp. [. . . ]