User manual MORPHY RICHARDS IB29003

[. . . ] Release the button to save time setting. Radio operation If the socket outlets in your home are not suitable for the plug supplied with this appliance the plug should be removed and the appropriate one fitted. IMPORTANT : THE PLUG REMOVED FROM THE MAINS LEAD, IF SEVERED, MUST BE DESTROYED AS A PLUG WITH A BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED INTO A LIVE SOCKET OUTLET. Should the fuse in the 13 amp plug require changing a 3 amp BS1362 fuse must be fitted. FM wire aerial To obtain the maximum FM reception fully extend the wire FM aerial (29) (which is located at the rear of the unit) and alter the direction of the wire for best results. [. . . ] To wake up to your favourite cd track, press and release the ALT button and then press or until desired track number is displayed. Wait until the clock reverts back to the time or press the time button. Set the ALARM selector switch to AUTO; the alarm indicators will light up. At the wake time, the unit will playback the whole cd or the programmed tracks. The player will remain in operation for 1 hour. To stop playback, press the POWER on/off button. REPEAT button 1 Press once for repeat of current track. 2 Press again for the whole cd to be repeated, the indicator will light. PLAY MODE 1 Press playmode button for random playback of all cd tracks. When the cd compartment is empty or a cd is incorrectly loaded or damaged the no (no disc) symbol will be displayed. 3 4 If the cd contents or the programmed tracks are less than 1 hour, then playback will stop at the end of the cd or programmed tracks. Program Use ALT button to program (see point 2 of waking to cd music). Press the PLAY MODE button twice to select program, ALT indicator will light up. When ALT LED indicator is lit, press PLAY to play programmed cd track. Waking up to buzzer Set alarm selector switch to BUZZER; the alarm indicators will light. Buzzer will sound when the alarm time is reached. How to cancel the alarm The alarm is programmed to sound for 1 hour. 1 SNOOZE; press this button to temporarily stop the alarm (display will start flashing). 2 POWER on/off; press to stop the alarm, the alarm will sound again 24 hours later. 3 Switch alarm selector switch to the off position to cancel alarm permanently, indicators will disappear. Setting alarm The unit allows you to select two different wake-up times that can be used separately or simultaneously (ALARM 1 OR 2 OR ALARM 1 and 2). Before setting the alarm move the selector to either alarm 1 or alarm 2 or alarm 1 and 2. ALARM 1: Press and hold the alarm 1 button, and then or to set the desired wake-up time. Set the alarm selector switch to AUTO and then set the function selector switch to FM or MW for radio or to cd for cd music. To cancel the alarm option set the alarm selector switch to off. Sleep to music 1 2 Select the function selector switch to the desired mode CD/MW/FM. [. . . ] If the door interlocks become defective the laser may cause invisible radiation. If there is a scratch, dirt or finger prints on the cd, it may cause tracking errors. The cd clock radio is for indoor use only. Warning labels WARNING: to reduce the risk of electric shock, do not expose this appliance to rain or moisture. ATTENTION: To reduce the risk of electric shock, do not remove the cover. The lightning flash with arrowhead symbol within the triangle is a warning sign alerting the user of `dangerous voltage' inside the unit. Your post office will provide a certificate of posting. [. . . ]