User manual MORPHY RICHARDS IB28050

[. . . ] . 96 80 100 100 106 108 140 160 Mhz X10 Khz 16 3 15 2 9 SNOOZE 10 4 567 8 11 12 13 14 Location of controls 28050 OPERATING INSTRUCTIONS 1 2 3 4 5 6 7 8 Auto/Alarm indicator Snooze button Dial scale with pointer Wire FM aerial Time button Sleep button Alarm button Volume control / buzzer 9 10 11 12 13 14 15 16 On/Off/Auto switch Band switch Tuning control Alarm off button Minute button Hour button Speaker LED clock display P. 2 Electrical requirements Check the voltage on the rating plate of your clock radio corresponds with your house electricity supply which must be A. C. If the socket outlets in your home are not suitable for the plug supplied with this appliance the plug should be removed and the appropriate one fitted. IMPORTANT : THE PLUG REMOVED FROM THE MAINS LEAD, IF SEVERED, MUST BE DESTROYED AS A PLUG WITH A BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED INTO A LIVE SOCKET OUTLET. [. . . ] If the optional battery is not installed in case of the AC power failure the display will blink to indicate the power was interrupted. If the unit is not to be used for a prolonged period, remove the battery to avoid battery leakage. In the interests of environmental safety : dispose of batteries safely. P. 3 P. 4 Wake up to the radio alarm Having selected your station and set the volume at the desired level, proceed as follows: 1 2 3 Switch the ON/OFF/AUTO switch (9) to the `AUTO' position. Press the ALARM button (7) and simultaneously press the HOUR button (14) and then the MINUTE button (13) until the desired alarm time is set. To check the wake up time simply press the ALARM button and the clock will show the present time. Snooze function The alarm can be interrupted for a 9 minute period. 1 Press the SNOOZE button (2), after 9 minutes the radio or alarm buzzer will sound again. To set the sleep function Your clock radio is equipped with a sleep function that will turn the radio on and switch it off automatically after a set period of time from between 1 minute to 1 hour 59 minutes. Press the SLEEP button (6) the LED display (16) will show 0:59 sleep time at the same time the radio will come on and stay on for 59 minutes. Press and hold the SLEEP button (6) whilst pressing the MINUTE button (13) the sleep time shown on the LED display (16) will start descending. Release all buttons when the desired sleep time is shown on the LED display (16). After the set sleep time has elapsed, the radio will automatically switch off. To switch off before the set sleep time has elapsed press the SNOOZE button (2). The preset wake up time will continue to be registered in the timer memory and the radio will switch on automatically the next day. Ensure the station you select will be transmitting at the preset alarm time. Wake to buzzer 1 · Set the controls as for `wake to radio' and set the VOLUME/BUZZER control (8) to the BUZZER position. 3 4 To stop the alarm The alarm is programmed to run for 1 hour 59 minutes. 5 6 1 2 The alarm can be switched off by pressing the ALARM OFF button or by sliding the ON/OFF/AUTO switch to the `OFF' position. The alarm will sound again 9 minutes later. 7 The alarm will stop and will operate again 24 hours later. [. . . ] The product will be repaired and returned to you promptly. Technical specification AC Power supply Battery back-up Radio : : : : 230v 50Hz 9V DC type 6LR61/PP3 (not included) FM 88Mhz - 108MHz AM 530Khz - 1600kHz Warning labels WARNING: to reduce the risk of electric shock, do not expose this appliance to rain or moisture. ATTENTION: To reduce the risk of electric shock, do not remove the cover. Refer any servicing to qualified personnel. The lightning flash with arrowhead symbol within the triangle is a warning sign alerting the user of `dangerous voltage' inside the unit. Helpline (8:30-5:00 Mon-Thur/ 8:30-4:00 Fri) UK 0870 060 2614 Republic of Ireland 1800 409119 Replacement parts 0870 167 6645 www. morphyrichards. co. uk The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product. To prevent fire or shock hazard do not expose this apparatus to dripping or splashing. AD28050M UK Rev 1 P. 7 [. . . ]