User manual MORPHY RICHARDS IB28017

[. . . ] Should the fuse in the 13 amp mains plug require changing a 3 amp BS1362 fuse must be fitted. The socket outlet should be installed near the equipment and shall be easily accessible. Switching on and setting the clock time Before any alarm functions can be used, you must set the clock to the correct time. Plug the mains plug into the wall socket and switch on the wall socket The LED clock display (6) will flash. [. . . ] In the interests of environmental safety : dispose of batteries safely. 4 5 P. 3 P. 4 Setting the alarm time 1 Press and hold the ALARM button (2) and simultaneously press the HOUR (16) or MINUTE button (13) to set the display to the desired alarm time. Release the ALARM button (2) when the desired alarm time is set. To stop the alarm (radio or buzzer) The alarm is programmed to run for 1 hr 59 minutes. To switch the alarm setting off permanently, slide the FUNCTION SELECTOR switch (1) to the `Off' position. Wake up to the radio alarm 1 2 Switch the FUNCTION SELECTOR switch (1) to the `ON' position. Set the BAND SELECTOR switch (10) to select either FM or MW wavebands as desired. To check that the alarm time has been set, slide the FUNCTION SELECTOR switch (1) to the `AUTO' position. The alarm will automatically turn off after 1 hr 59 minutes. 2 3 3 4 5 Snooze function The alarm can be interrupted for a 9 minute period. 1 Press the SNOOZE button (9), after 9 minutes the radio or alarm buzzer will sound again. To set the sleep function Your clock radio is equipped with a sleep function that will turn the radio on and switch it off automatically after a set period of time from between 59 minutes to 1 minute. Pressing the hour button (16) will extend the sleep time to 1 hour 59 minutes. 1 Press the SLEEP button (8) the LED display will show 0:59 sleep time at the same time the radio will come on and stay on for 59 minutes. Press and hold the SLEEP button (8) whilst pressing the MINUTE button (13) or HOUR button (16) the sleep time shown on the LED display will start descending. Release all buttons when the desired sleep time is shown on the LED display. After the set sleep time has elapsed, the radio will automatically switch off. To switch off before the set sleep time has elapsed press the SNOOZE button (9). Ensure the station you select will be transmitting at the preset alarm time. Wake up to the alarm buzzer In order to check the correct alarm time has been set press the ALARM button (2). The display will indicate the alarm time set. 1 Slide the FUNCTION SELECTOR SWITCH (1) to the `BUZZER' position. [. . . ] Refer any servicing to qualified personnel. Your post office will provide a certificate of posting. If you need any further advice, please call our Helpline (UK local rate) on: 08450 777700 (Mon-Fri) Morphy Richards Website: www. morphyrichards. co. uk The lightning flash with arrowhead symbol within the triangle is a warning sign alerting the user of `dangerous voltage' inside the unit. The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product. To prevent fire or shock hazard do not expose this apparatus to dripping and splashing. 446/8001/84 Rev 2 Morphy Richards Ltd, Talbot Road, Mexborough, S64 8AJ Morphy Richards products are intended for household use only. [. . . ]