User manual MORPHY RICHARDS IB28011

[. . . ] IMP0RTANT : THE PLUG REMOVED FROM THE MAINS LEAD, IF SEVERED, MUST BE DESTROYED AS A PLUG WITH A BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED INTO A LIVE SOCKET OUTLET. Should the fuse in the 13 amp plug require changing a 3 amp BS1362 fuse must be fitted. Switching on and setting the clock time Before any alarm functions can be used on your alarm clock radio you must first set the clock to the correct time. Plug the mains plug into the wall socket and switch on the wall socket. [. . . ] If the unit is not to be used for a prolonged period, remove the battery to avoid battery leakage. In the interests of environmental safety : dispose of batteries safely. The clock display (20) will dim automatically depending upon the darkness. Earphone socket (earphones not supplied) To listen to the radio privately, connect the earphones with a 3. 5mm plug to the jack (2) on the side of the unit. Whilst using the earphones make sure that the alarm is not set to the buzzer position. P. 3 P. 4 Setting the alarm to wake to buzzer 1 2 Slide the alarm function switch (19 or 22) to select your wake up mode: -To BUZZER position for alarm buzzer sound. Once the alarm switch has been activated the ALARM indicator AL1 (18) and/or AL2 (21) will illuminate. Snooze function You can press the SNOOZE button (10) after the alarm has sounded which allows 7 minutes of snooze time. (The snooze default is set for 7 minutes and then resumes). Listening to the radio 1 2 3 4 5 Press the RADIO ON button (7) Slide the waveband switch (4) to either the FM or MW position. Press the OFF button (5) to turn off the radio. The snooze function will cease to operate after 59 minutes. Sleep function The sleep function sets the unit to play the radio whilst you go to sleep and will switch off after a set time. 2 To use the sleep facility press the SLEEP button (9), (The sleep default is set for 59 minutes after which time the unit will automatically switch off). 4 To set your own sleep time, press the SLEEP button (9) together with the FAST FORWARD button (15) or the SLOW REVERSE button (16) will adjust the minute segments. 6 If you want to turn off the music before the end of the programme press the OFF button (5). When the sleep time has expired the radio will switch off. To obtain the maximum reception fully extend the wire FM aerial which is located at the rear of the unit and alter the direction of the wire for best results. To obtain, the maximum MW reception rotate your clock radio. Setting the alarm to wake to radio 1 2 3 4 Set the radio as described `listening to the radio' above. Once the Alarm switch has been activated the ALARM indicator AL1 (18) and/or AL2 indicator (21) will illuminate. To stop listening to the radio press the OFF button (5). Built in Halogen reading lamp 1 2 The lamp can be adjusted up and down by using the telescopic arms (25). The lamp can be switched on and off by the on/off switch (1). Ensure the radio station will be transmitting at the preset alarm time. Cancelling the alarm (either set to radio or buzzer) The alarm is programmed to run for 59 minutes. 1 2 3 Press the SNOOZE button (10) to stop the alarm temporarily, the alarm will sound again in 7 minutes. If the alarms are no longer required slide the alarm function switch (19 or 22) to the OFF position. [. . . ] The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product. To prevent fire or shock hazard do not expose this apparatus to dripping or splashing. 0. 1 m Minimum distance from lighted objects Ground glass size 23/8 x 11/2 x1/8 inch (61 x 38 x 3mm) Replace any cracked protective shield Warning: 1 2 If the external cable or cord of this lamp clock radio is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. For indoor use only. 446/8001/90 Rev 2 Morphy Richards Ltd, Talbot Road, Mexborough, S64 8AJ Morphy Richards products are intended for household use only. [. . . ]