User manual MORPHY RICHARDS IB26010

[. . . ] Part Number ­ PC26010M UK REV 1 Registered address: Morphy Richards Ltd Mexborough, South Yorkshire S64 8AJ www. morphyrichards. com PROFESSIONAL CORDLESS CLIPPER SET INSTRUCTIONS WIRING This product is fitted with a 13A (BS1363) plug. Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be AC (Alternating Current). If the socket outlets in your home are not suitable for the plug supplied with this appliance the plug should be removed and the appropriate one fitted. [. . . ] You will be asked to return the product (in secure packaging) to the address below along with a copy of proof of purchase. MAINTENANCE Your clippers were examined to ensure that the blades were oiled and aligned before leaving our factory. Blades must be realigned if they have been removed for cleaning or replacement. To realign the blades, simply match the upper and bottom blades teeth up, point for point. If blade alignment is incorrect, add a few drops of oil to the blades, turn the clipper on for a few moments, turn off, loosen screws slightly and adjust. To maintain the clipper in peak condition, the blades should be oiled every few haircuts. Do not use hair oil, grease, oil mixed with kerosene or any other solvent. Solvent will evaporate and leave the oil thick, which may slow down the blades. Clipper oil is a very thin natural oil which will not evaporate and will not slow down the blades. THE AFTER SALES DIVISION Registered address: Morphy Richards Ltd. Mexborough, South Yorkshire S64 8AJ England Helpline (8:30-5:00 Mon-Thur/ 8:30-4:00 Fri) UK 0870 060 2614 Replacement parts 0870 167 6645, Republic of Ireland 1800 409119 Morphy Richards products are intended for household use only. Morphy Richards has a policy of continuous improvement in product quality and design. The Company, therefore, reserves the right to change the specification of its models at any time. Part number: PC26010M Rev 1 Imported by: Morphy Richards Ltd, Talbot Road, Mexborough, South Yorkshire S64 8AJ Thank you for buying your new Morphy Richards Mark Hill Clipper set. Please read these instructions carefully before use and keep in a safe place for future reference. ADJUSTABLE LEVER The lever is conveniently located near your thumb (if you are right handed), so that it can be easily adjusted while the clipper is in your hand. The lever adds versatility to your clipper by allowing you to gradually change the closeness of your cut without an attachment comb. When the lever is in the uppermost position, the blades will give you the closest cut and leave the hair very short. To give your clipper extra power, press and hold the turbo button during use. KEY FEATURES 1. [. . . ] Slowly lift the clipper up and outward through the hair, cutting only a small amount at a time. If you require shorter hair, change to a lower number attachment comb or apply more pressure and less lift away from the head with the present attachment comb. FOR THE PERFECT SHORT STYLE. . . Always cut from the back of the neck to the crown, using the longest attachment comb. [. . . ]