User manual MORPHY RICHARDS IB25014

[. . . ] `Glam It Up' Beauty Mirror Model 25014 Instructions Thank you for buying your new Morphy Richards, Mark Hill beauty mirror. Please read these instructions carefully before use and keep in a safe place for future reference. Key Features · · Soft halo lighting Double sided Double sided mirror -Standard magnification on one side -Triple magnification on reverse side Angle locking device for ease of use Mains operated with power cord and on/off switch 2 Using your beauty mirror Place the mirror on a hard, level surface. [. . . ] Replace the mirror rim section aligning the screw holes exactly and carefully replacing the screws. Bulb specification - 240 volts 25 watt Eddison small screw fitting clear candle bulb 3 Important Safeguards When using your beauty mirror, basic safety precautions should always be followed. Be sure never to place the mirror in a position where it can reflect sunlight. To protect against the risk of electric shock, do not immerse the appliance in water or in any other liquids. Never under any circumstances use abrasive cleaners as these will cause damage to the surface of the appliance. 3 4 5 6 7 8 9 Wiring This product is fitted with a 13A (BS1363) plug. Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A. C. If the socket outlets in your home are not suitable for the plug supplied with this appliance the plug should be removed and the appropriate one fitted. IMPORTANT : THE PLUG REMOVED FROM THE MAINS LEAD, IF SEVERED, MUST BE DESTROYED AS A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED INTO A LIVE SOCKET OUTLET. Mains Lead As a safety precaution and to prolong the life of your appliance, do not wrap the mains lead around the appliance as this will cause damage. 5 Two Year Guarantee It is in your interest to retain the retailers receipt as proof of purchase. All Morphy Richards products are individually tested before leaving the factory. In the unlikely event of any appliance proving to be faulty within 28 days of purchase it should be returned to the place of purchase for it to be replaced. [. . . ] Morphy Richards has a policy of continuous improvement in product quality and design. The Company, therefore, reserves the right to change the specification of its models at any time. 446/8001/27 Rev 1 Imported by : Morphy Richards Ltd, Talbot Road, Mexborough, S64 8AJ [. . . ]