User manual MORPHY RICHARDS IB22071

[. . . ] Note that most hair types will not require the maximum temperature of 200°C 1 Clamp the roots of the section between the straightening plates 1 Gently and swiftly run the straighteners down the hair for 5 seconds 1 Take the next section and repeat until desired effect is achieved 1 Finish by running a wide toothcomb through the hair STYLE VARIATIONS To retain plenty of body and bounce Straighten only the top sections of the hair around the crown areas to give a smooth yet voluminous finish. To create softness and shape around the face While gliding the straightener down your hair, as you get half way down the section, turn your wrist inwards to shape the hair around your face and frame your features perfectly. For a choppier texture Flick-out hair at the very ends by turning wrists outwards as you get about two thirds of the way down your section. USING YOUR STRAIGHTENER: 1. After washing your hair, it's really important to prepare it for styling. [. . . ] To ensure optimum performance, you will need to replace the straightener back in the base approximately every 4 minutes. It's really easy to do this while you section the next piece of hair to straighten. Leave the straightener in the base for a few seconds and full temperature will be regained. `Ready' will begin to flash on the digital display to indicate the straightener has reached full temperature and is ready to use again. Don't forget to switch off your straighteners at the base unit by pressing and holding the on/off button. Never wind the mains cable around the straightener ­ use the cable storage available in the base unit. WIRING The product is fitted with a 13A (BS1363) plug. Check the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be AC (Alternating Current). If the socket outlets in your home are not suitable for the plug supplied with this appliance the plug should be removed and an appropriate one fitted. IMPORTANT: THE PLUG, REMOVED FROM THE MAINS LEAD, IF SEVERED, MUST BE DESTROYED AS A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED INTO A LIVE SOCKET OUTLET. CLEANING YOUR STRAIGHTENER Over time, you will find a natural build up on your straightening plates. This can be caused by natural oils in your hair and styling products and lotions. At the first sign of build up, you should clean your straightening plates. To do this, always switch your straightener off and wait for them to cool down. Failure to do this may mean the build up becomes burnt onto the straightening plates and they will become difficult to clean. If your straightening plates do become discoloured it will NOT affect their performance. MAINS LEAD As a safety precaution, and to prolong the life of your appliance, do not wrap the mains lead around the straightener unit. Use the cable storage provided in the base unit. SAFETY INFORMATION When using your hair straightener, basic safety precautions should always be followed. Please read these instructions carefully before using the product, and keep them in a safe place for future reference. This straightener is of professional standard, and reaches very high temperatures. Always be careful not to allow the plates to come into contact with the skin. [. . . ] The appliance should be used with the stand provided. PRODUCT FEATURES: 7 1 2 9 3 6 1. Rubber plate guards 2-YEAR GUARANTEE It is in your interest to retain the retailer's receipt as proof of purchase. All Morphy Richards products are individually tested before leaving the factory. In the unlikely event of any appliance proving to be faulty within 28 days of purchase it should be returned to the place of purchase for it to be replaced. [. . . ]