User manual MORPHY RICHARDS BREEZE IRON

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MORPHY RICHARDS BREEZE IRON. We hope that this MORPHY RICHARDS BREEZE IRON user guide will be useful to you.


MORPHY RICHARDS BREEZE IRON : Download the complete user guide (173 Ko)

Manual abstract: user guide MORPHY RICHARDS BREEZE IRON

Detailed instructions for use are in the User's Guide.

[. . . ] Incorrect reassembly can cause a risk of electric shock when the iron is used. · This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Location · Do not use outdoors. · When placing the iron on it's heel, ensure that the surface on which the heel is placed is stable. Children · Close supervision is necessary when any appliance is used near children. · Children should be supervised to ensure that they do not play with this appliance. Personal safety · Burns can occur from touching hot metal parts, hot water or steam. [. . . ] Never use battery topping up fluid or water containing any substances like starch, or sugar, or defrosted water from a refridgerator. WARNING: When filling your iron with tap water always use the beaker provided. A < > fi / , fl · , , / Steam control ¤ Spray button < Shot of steam button (certain models only) > Filling hole with cap fi Spray nozzle fl Soleplate Temperature control dial with indicator · Water tank , Temperature indicator light (red) , , Filling beaker Before use Note: The steam facility should only be used on garments which are suitable for ironing at the 2 and 3 dot settings. When ironing with the steam facility at the 2 dot setting, the steam output should be set at the lower end of the steam range (see variable steam section). If they don't you should follow the fabric guide on page 3, but be sure to test the temperature by ironing the hem of the garment or similar area first. If you turn the control dial down from a hot setting to a cooler setting, wait until the iron temperature has stabilised before you continue ironing. Temperature control Plug in the iron and switch on. Set the temperature control dial B to the temperature required, but don't start ironing immediately. If you wait a few minutes, the iron will stabilise at the required setting. Your Morphy Richards iron is fitted with an indicator light , which will go on and off while you are ironing. B 4 40310 Rev 2 24/8/07 15:08 Page 5 This is perfectly normal as it shows that the iron is maintaining the heat setting you have chosen. It is always a good idea to begin with cool fabrics and work up to higher settings. An iron heats up quicker than it cools down so you'll save time and electricity. C Steam No steam Features of your iron Temperature indicator light The indicator light shows that the iron is warming up. When the required temperature is reached the light will go out and will cycle on-off during operation. The spray feature may be used provided there is water in the tank (see filling section). Spray Press the spray button ¤ and aim the spray of water at stubborn creases. You can do this whilst dry ironing providing there is water in the tank. When using the water spray it may be necessary to push the button a few times to get the spray pump primed. Steam control Fill the iron with water as described in `Filling', page 4 and insert the plug into the electrical socket. The steam output can be switched from off to on by sliding the steam control C. / The steam facility should only be used on garments which are suitable for ironing at 2 and 3 dot setting. Shot of steam (certain models only) Press the shot of steam button < to obtain a burst of extra steam for ironing out creases in heavy material such as denim etc. The shot of steam can be used whilst dry ironing, providing there is water in the tank, and the temperature control is set within the steam range. Do not use shot of steam at temperatures below the steam range shown on the control. [. . . ] Please have the following information ready to enable our staff to deal with your query quickly. · Name of the product · Model number as shown on the underside of the appliance. For electrical products sold within the European Community. At the end of the electrical products useful life it should not be disposed of with household waste. You will be asked to return the product (in secure, adequate packaging) to the address below along with a copy of proof of purchase. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MORPHY RICHARDS BREEZE IRON




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MORPHY RICHARDS BREEZE IRON will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.