Detailed instructions for use are in the User's Guide.
[. . . ] Dual HD inputs on the remote card support connection of two HD-SDI cameras with either one channel at full 4:2:2 sampling and the other sub-sampled at 2:1:1, or both channels sampled at 4:1:1. [. . . ] Optionally, the cards may be factory configured to support optical transmission of two independent HD-SDI input signals at full 4:2:2 sampling. The MEMORY can be used as a standalone card or stacked with a wide range of 907 expansion cards available in a variety of formats, including RS-232/485/422, TTL, Ethernet, CANBus, analog sonar, hydrophone, audio, and Tritech ARCNET. It may also be optically integrated into a larger 907 system via CWDM modules. standard (others available) CWDM wavelengths for combining multiple 907 cards on one singlemode fiber; bidirectional transceivers; extended temperature
Electrical
Power Supply Current Draw Power Used Voltage Protection Current Protection +5 VDC +/-10%, regulated input required 1. 3 A typical (2 A max. ) 6. 5 W typical (10 W max. ) Overvoltage and reverse polarity Time delay fuse (3 A) PC/104 (form factor only) 125 g (0. 27 lb), including SFP Contact Moog for custom enclosures 0. 625 inch standoffs required when stacking cards. Contact Moog for stacking options Short pins on PC/104 standard for all wavelengths Dual LC (SFP) Mini-SMB (75 ohm) 2 x 8-pin Molex for serial data 1 x 2-pin Molex, 0. 156 inch pin spacing PC/104 (for stacking 907 cards only) -10 to +60 °C (ambient, operational) -20 to +85 °C (ambient, storage) 85% relative, non-condensing 30 g, 11 ms, half-sine, six directions 1 - 2 mm (5 - 25 Hz), 5 g (25 - 1000 Hz) Power (electrical), optical link, optical fault, serial Tx/Rx, video status Available through 907-DIAG-E card at console
Mechanical
Dimensions Weight Enclosures Stacking Spacers Stacking Pins
Data
No. of Channels Format Data Rate Options
Connectors
Optical Video Data (Serial) Power Stacking Header
Optical
Optical Fiber Baud Rate Format Wavelengths Flux Budget Options
Environmental
Temperature Humidity Shock Vibration
Diagnostics
LEDS Ethernet to PC
MEMORY Dimensions
Dimensions in inches [mm]
Specifications and information are subject to change without prior notice. [. . . ] Contact Moog for stacking options Short pins on PC/104 standard for all wavelengths Dual LC (SFP) Mini-SMB (75 ohm) 2 x 8-pin Molex for serial data 1 x 2-pin Molex, 0. 156 inch pin spacing PC/104 (for stacking 907 cards only) -10 to +60 °C (ambient, operational) -20 to +85 °C (ambient, storage) 85% relative, non-condensing 30 g, 11 ms, half-sine, six directions 1 - 2 mm (5 - 25 Hz), 5 g (25 - 1000 Hz) Power (electrical), optical link, optical fault, serial Tx/Rx, video status Available through 907-DIAG-E card at console
Mechanical
Dimensions Weight Enclosures Stacking Spacers Stacking Pins
Data
No. [. . . ]