User manual MONITOR AUDIO RADIUS 255 FIXING INSTRUCTIONS 2005

[. . . ] This instruction sheet explains in detail how to fix your Radius 225/ Radius 250 to the wall by using the wall fixing plate. [. . . ] If unsure, please obtain the services of a competent qualified tradesperson. WARNING: Ensure that there are no water pipes or electricity cables running behind where the wall bracket is going to be secured. ALWAYS CONNECT YOUR CABLES TO THE LOUDSPEAKERS BEFORE CONNECTING THEM TO THE AMPLIFIER ©Monitor Audio 2005 Radius 225/ 250 Wall Plate Fixing Instructions 1 FIXING INSTRUCTIONS 1. Decide where you are going to position your Radius 225/ 250 loudspeakers. You can position them horizontally (centre channel) or vertically (left/ right, front/ rear). NOTE: The loudspeaker will drop 6mm when placed on the fixing plate, therefore, take that into account when considering fixing. Hold the fixing plate to the wall (in the desired location), and mark the fixing positions in the two long thin slots. The centres of the two fixing points are 474mm apart for the Radius 225 and 624mm for the Radius 250. [. . . ] Ensure all four are lined up correctly before pushing down into place. ©Monitor Audio 2005 Radius 225/ 250 Wall Plate Fixing Instructions 2 [. . . ]