User manual MK SOUND INWALLS MOUNTING TEMPLATE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MK SOUND INWALLS MOUNTING TEMPLATE. We hope that this MK SOUND INWALLS MOUNTING TEMPLATE user guide will be useful to you.
 |
MK SOUND INWALLS MOUNTING TEMPLATE : Download the complete user guide (176 Ko) |
Manual abstract: user guide MK SOUND INWALLS MOUNTING TEMPLATE
Detailed instructions for use are in the User's Guide.
[. . . ] LEVEL TO THIS LINE
TRACE AROUND THIS TEMPLATE
Wall cutout for SW-95/SW-62/BE-65 in-wall speaker
IMPORTANT! [. . . ] Mark wall with template, using a stud finder to maintain a 2" distance from any stud. Make sure that you are clear of any crossbraces in the wall structure.
FOR STANDARD INSTALLATION DRYWALL THICKNESS CANNOT EXCEED 1. 25 INCHES. FOR THICKER WALLS CALL M&K SOUND.
Be careful when bending and handling the strip so that you do not rip it. Tape speaker wire to the back wall so the end is within the opening as shown. Fold the first section of the foam strip and insert the corner through the wall opening. Continue folding and inserting the rest of the foam strip into the wall opening until the foam frame is created. [. . . ] Make sure that the frame is centered within the opening
Note: Do not put any other acoustic filler within the wall opening as it can interfere with speaker mounting.
PN: 70306 SW95/SW62/BE65 cutout temp 08/26/02 pt
7-1/4" (18. 4cm) [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MK SOUND INWALLS MOUNTING TEMPLATE
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MK SOUND INWALLS MOUNTING TEMPLATE will begin.